The effect of fines on the consolidation of Eucalyptus/PLA fiber air-laid sheets

• Autor(es): Santos, A. S. ; Zamani, E. S. ; Sousa, A. P. M. ; Pinto, P. C. O. R. ; Ferreira, Paulo J. T. ; Maloney, T.
• Data: 2023
• Identificador Persistente: https://hdl.handle.net/10316/107114
• Origem: Estudo Geral - Universidade de Coimbra
• Tipo de Documento: Artigo científico
• Idioma: Inglês

Descrição

Bio-based nonwoven products are potentially more sustainable with a lower environmental impact than the current generation of petrochemical nonwovens. This work aims to examine the structure and performance of an air-laid sheet composed of defibrated Eucalyptus pulp and polylactic acid (PLA) fibers. In this work, Eucalyptus pulp dry fibers were prepared through two different methodologies, yielding fibers with distinct morphological properties. In an air-laid former, specially conceived for this work, sheets with a grammage of 100 g m−2 were prepared from fiber blends with moisture to aid in the consolidation. The resulting air-laid sheets were characterized by their structural, mechanical, and water sorption properties. The results showed that Eucalyptus fibers with fewer fines and fiber deformations yielded more absorbent sheets. The high fines group gave higher sheet strength. 30% of PLA fiber gave the best combination of strength and absorption capacity and stretch at break. The improvement in bulk, dry and wet strength was possible for air-laid sheets produced from the Eucalyptus/PLA mixture. The results showed that PLA has a strong interaction with the sheet fines, affecting consolidation and performance of the final product.

Project InPaCTus e Innovative Products and Technologies from eucalyptus, Project Nº 21 874 funded by Portugal 2020 through European Regional Development Fund (ERDF) in the frame of COMPETE 2020 nº 246/AXIS II/2017.