Autor(es): Ozkan, Sila ; Gonçalves, Diogo ; Paulo, Ivo ; Queirós, Carla S. G. P. ; Carvalho, Ana ; Puna, Jaime ; Gomes, João ; Bordado, João ; Santos, Rui Galhano dos
Data: 2023
Identificador Persistente: http://hdl.handle.net/10400.21/16113
Origem: Repositório Científico do Instituto Politécnico de Lisboa
Assunto(s): Liquefaction; Bio-oil; Solvent; Biomass; Catalyst; Forest wildfires; Burnt pine heartwood; Maritime pine; Biofuel
This study focused on bio-oil production by thermochemical liquefaction. For the reaction, the burnt pine heartwood was used as feedstock material, 2-Ethylhexanol (2-EHEX) was used as a solvent, p-Toluenesulfonic acid (pTSA) was used as a catalyst, and the solvent for washing was acetone. The procedure consisted of a moderate-acid-catalysed liquefaction process, and it was applied at three different temperatures, 120, 140, and 160 degrees C, and at 30, 105, and 180 min periods with 1%, 5.5%, and 10% (m/m) catalyst concentration of overall mass. Optimal results showed a bio-oil yield of 86.03% and a higher heating value (HHV) of 36.41 MJ/kg, which was 1.96 times more than the HHV of the burnt pine heartwood. A reaction surface methodology (Box-Behnken design) was performed for the liquefaction reaction optimisation. Reaction temperature, reaction time and catalyst concentration were chosen as independent variables. The obtained model showed good results with a high adjusted R-squared (0.988) and an excellent p-value (less than 0.001). The liquefied products were characterised by Fourier Transformed Infrared (FTIR) and thermogravimetric analysis (TGA), and also Scanning electron microscopy (SEM) was carried out to validate the impact of the morphological changes on the surface area of the solid samples. This study shows an excellent opportunity to validate a method to upcycle woody wastes via acid-catalysed liquefaction. In particular, this approach is of great interest to produce bio-oil with a good yield, recovering part of the values lost during wildfires.
