Author(s): Fernandes, Valter ; Carvalho, Oscar ; Silva, Filipe ; Henriques, Bruno ; Özcan, Mutlu ; Souza, Júlio C. M.
Date: 2024
Persistent ID: http://hdl.handle.net/10400.14/44049
Origin: Veritati - Repositório Institucional da Universidade Católica Portuguesa
Subject(s): Intracanal post; Resin cement; Surface modification; Adhesion; Bond strength
Objectives The aim of this study was to perform experimental evaluation of the synergistic effects of laser-texturing and different traditional surface modification approaches to improve the push-out bond strength of glass fiber-reinforced composite (GFRC) posts to resin-matrix cements used in endodontically treated teeth rehabilitation. Methods One hundred and ten freshly extracted mandibular single-rooted premolars were endodontically treated and groups of specimens were divided according to the GFRC cementation after different surface treatment, as follow (n = 10): silane-based conditioning (SIL); 9.7 % HF acid-etching (HF); 35 % H2O2 etching (H2O2); grit-blasting (GB); HF plus H2O2 etching (HFH2O2); 6 W Nd:YAG laser-texturing (L6W); 4.5 W Nd:YAG laser-texturing (L4.5W); 3 W Nd:YAG laser-texturing (L3W); 3 W Nd:YAG plus 35 % H2O2 (L3WH2O2); 3 W Nd:YAG plus SIL (L3WSIL); and no-treatment (C). GFRC posts were cemented into the tooth root canals using a dual-cured resin cement. Then, specimens were cross-sectioned and mechanically assessed by push-out bond strength tests. Specimens were inspected by optical microscopy and scanning electron microscopy at magnification from × 30 up to × 2000. Data were analyzed using one-way analysis of variance and Tukey post hoc test (p = 0.05). Results Surface analyses of the GFRC posts showed a rough and retentive morphological aspect with a removal of the outer epoxy matrix layer and exposure of glass fibers after laser-texturing, grit-blasting or etching under 35 % H2O2. The highest bond strength values at 21.8 MPa was recorded for GFRC posts after laser-texturing on 3W plus silane-based conditioning followed by the group etched with 35 % H2O2 (20.5 MPa). The failure mode was characterized as cohesive and mixed pathways. The lowest bond strength values around 5 and 9 MPa were recorded for untreated GFRC surfaces or specimens etched with HF that was noticeable by adhesive failure pathways. Conclusions The combination of acidic etching and silane conditioning with laser-texturing at medium intensity promoted an adequate surface modification of GFRC posts and increased adhesion to a resin-matrix cement. Such combination of physicochemical approaches can enhance the long-term mechanical behavior of the restorative interface at endodontically treated teeth. Clinical relevance Combining traditional and novel physicochemical approaches can provide promising adhesion pathways for glass fiber-reinforced composite posts to resin-matrix cements. A high mechanical interlocking of the resin-matrix cements and stable retention of the teeth root intracanal posts can decrease the risks of clinical failures by fracture and detachment of the adhesive interface.
