Autor(es): Sena-Cruz, José ; Correia, Luís ; Ribeiro, Filipe ; Figueira, Diogo ; Benzo, Pier Giovanni ; Barros, Joaquim A. O. ; Pereira, Eduardo ; Valente, Isabel B.
Data: 2020
Identificador Persistente: https://hdl.handle.net/1822/68153
Origem: RepositóriUM - Universidade do Minho
Assunto(s): GFRP; FRC; Epoxy-based adhesives; Surface treatment; Durability; Bond; Pull-off tests
An experimental study on the performance of adhesive connection between Glass Fibre Reinforced Polymer (GFRP) plates and Steel Fibre reinforced self-compacting Concrete (FRC) was conducted. Fresh FRC was poured out onto the surface of GFPR plates, to create 40 square specimens (300 by 300 by 45 [mm]). Pull-off tests were performed to evaluate the tensile strength of the adhesive connection when different types of adhesives (four) and surface treatments (three) are used. Furthermore, the effect of five different environmental conditions on the tensile strength of the adhesive connection was also evaluated. After analysing the results and performing a variance analysis (ANOVA), it has been shown that the pull-off behaviour is highly influenced by the type of adhesive and by the environmental action. In spite of that, the dominant failure mode was cohesive failure in the FRC substrate, therefore good bond conditions between both materials were achieved.
