Author(s): Lopes, Ana Carina Ferreira ; Sampaio, Álvaro M. ; Pontes, A. J.
Date: 2024
Persistent ID: https://hdl.handle.net/1822/90351
Origin: RepositóriUM - Universidade do Minho
Subject(s): Additive manufacturing; Composite materials; GNP; MWCNT; Polyamide 12; Selective laser sintering
Purpose: With the technological progress, high-performance materials are emerging in the market of additive manufacturing to comply with the advanced requirements demanded for technical applications. In selective laser sintering (SLS), innovative powder materials integrating conductive reinforcements are attracting much interest within academic and industrial communities as promising alternatives to common engineering thermoplastics. However, the practical implementation of functional materials is limited by the extensive list of conditions required for a successful laser-sintering process, related to the morphology, powder size and shape, heat resistance, melt viscosity and others. The purpose of this study is to explore composite materials of polyamide 12 (PA12) incorporating multi-walled carbon nanotubes (MWCNT) and graphene nanoplatelets (GNP), aiming to understand their suitability for advanced SLS applications. Design/methodology/approach: PA12-MWCNT and PA12-GNP materials were blended through a pre-optimized process of mechanical mixing with various percentages of reinforcement between 0.50 wt.% and 3.00 wt.% and processed by SLS with appropriate volume energy density. Several test specimens were produced and characterized with regard to processability, thermal, mechanical, electrical and morphological properties. Finally, a comparative analysis of the performance of both carbon-based materials was performed. Findings: The results of this research demonstrated easier processability and higher tensile strength and impact resistance for composites incorporating MWCNT but higher tensile elastic modulus, compressive strength and microstructural homogeneity for GNP-based materials. Despite the decrease in mechanical properties, valuable results of electrical conductivity were obtained with both carbon solutions until 10–6 S/cm. Originality/value– The carbon-based composites developed in this research allow for the expansion of the applicability of laser-sintered parts to advanced f ields, including electronics-related industries that require functional materials capable of protecting sensitive devices against electrostaticdischarge.
