Comparison of chemical composition of packable resin composites by scanning electron microscopy

• Author(s): Silva,Ana Amélia Bianchi e ; Veeck,Elaine Bauer ; Oliveira,José Pedro Peixoto de ; Souza,Paulo Henrique Couto
• Date: 2005
• Origin: Oasisbr
• Subject(s): Packable composite; Spectroscopic test; Composite resins
• Document Type: Journal article
• Language: English

Description

OBJECTIVES: the purpose of this study was to compare the chemical composition of four different shades (incisal/extra-light, A2, A3 and B3) of two packable resin composites (SOLITAIRE®, and PRODIGY CONDENSABLE TM). METHODS AND MATERIALS: the specimens measured 4mm in diameter and 4mm in thickness. Five specimens were made for each shade of the materials. They were light cured for 40 seconds at a power of 600mW/cm². Subsequently, the specimens were removed from the plates and ground to powder and then pressed into holes measuring 4mm in diameter in a Teflon matrix, using the plates of the same material as base and cover. Specimens were evaluated under SEM with an x-ray detector for the spectroscopic test by energy dispersing. RESULTS: the chemical components found in both materials were practically the same, but in different proportions. Carbon, Oxygen, Aluminum, Silica, Fluoride and Barium were found. CONCLUSIONS: the chemical composition of each same material varied according to each shade analyzed.