A greener and more sensitive spectrophotometric procedure has been developed for the determination of phenol and o-cresol that exploits an aqueous two-phase system (ATPS) using a liquid–liquid extraction technique. An ATPS is formed mostly by water and does not require organic solvent. Other ATPS components used in this study were the polymer, polyethylene oxide, and some salts (i.e., Li2SO4, Na2SO4 or K2HPO4 +...
We investigated the extraction behavior of Cu(II) in the aqueous two-phase system (ATPS) formed by (L35 + MgSO4 + H2O) or (L35 + (NH4)2SO4 + H2O) in the presence of the extracting agent 1-(2-pyridylazo)-2-naphthol (PAN). At pH = 3 and a PAN concentration of 0.285 mmol kg−1, both ATPS lead to the effective separation of Cu(II) from other metallic ions (Zn(II), Co(II), Ni(II) and Fe(III)). High separation factors...
Phase diagrams of aqueous two-phase systems composed of PEO1500 + salt (di-potassium phosphate + potassium hydroxide or ammonium sulfate or zinc sulfate) + water were determined at (283.15, 298.15, and 313.15) K. All systems produce a large two-phase region; however the influence of temperature on the binodal position seems to be very small. By analyzing the effects of ammonium sulfate or zinc sulfate, it was o...
Partition of the natural dye carmine has been studied in aqueous two-phase systems prepared by mixing aqueous solutions of polymer or copolymer with aqueous salt solutions (Na2SO4 and Li2SO4). The carmine dye partition coefficient was investigated as a function of system pH, polymer molar mass, hydrophobicity, system tie-line length and nature of the electrolyte. It has been observed that the carmine partition ...
A new method has been developed for the spectrophotometric determination of p-aminophenol (PAP) in water, paracetamol formulations and human urine samples with a recovery rate between 94.9 and 101%. This method exploits an aqueous two-phase system (ATPS) liquid–liquid extraction technique with the reaction of PAP, sodium nitroprusside and hydroxylamine hydrochloride in pH 12.0, which produces the [Fe2(CN)10]^10...
This work developed a new and efficient method of extracting and separating Co(II), Ni(II) and Cd(II) in aqueous two-phase systems (ATPS) composed of triblock copolymer (L64) + Na2C4H4O6 + water and L64 + Li2SO4 + water using the hydrophobic extractant 1-nitroso-2-naphtol, which complexes the metal ions and partitions in the triblock copolymer micelles in the ATPS top phase. Metal extraction from the salt-rich ...
The phase diagrams of PEO1500 + sodium tartrate + water, PPO400 + sodium tartrate + water, PEO1500 + sodium succinate + water, PPO400 + sodium succinate + water, PEO1500 + sodium citrate + water, PPO400 + sodium citrate + water and PPO400 + sodium acetate + water aqueous two-phase systems were determined at (283.15, 298.15, and 313.15) K. Both equilibrium phases composition were analyzed by conductimetry and re...
Linear alkylbenzene sulfonates (LAS) are synthetic anionic surfactants that are extensively used in many industries. As a result, large volumes of effluents containing high levels of these compounds are discharged into water bodies, causing risks to aquatic flora and fauna. Then, there is a need for environmentally safe and economically viable technologies for the removal of LAS from aqueous matrices. The prese...
In view of the importance of resource recycling and the use of environmentally safe systems to extract the metals contained in wastes, the present study concerns the extraction/separation of lanthanum from spent Ni–MH batteries. Investigation was made of the extraction behavior of lanthanum using aqueous twophase systems (ATPSs), and a new environmentally safe hydrometallurgical method was developed for the sel...
This paper reports a green and efficient procedure for extraction of the dyes Malachite Green (MG), Methylene Blue (MB), and Reactive Red 195 (RR) using an aqueous two-phase system (ATPS). An ATPS consists mainly of water, together with polymer and salt, and does not employ any organic solvent. The extraction efficiency was evaluated by means of the partition coefficients (K) and residual percentages (% R) of t...