The growing need for sustainable wastewater treatment solutions has led to exploring alternative materials to explore large-scale and reliable technologies. This study focuses on optimizing the synthesis of geopolymers based on fly ash using a Box-Behnken experimental design to enhance their adsorption efficiency for phenolic compounds, as gallic acid model pollutant which are widely found in wastewater leachin...
Nitrophenols are persistent organic pollutants that pose serious environmental and health risks due to their toxic and lipophilic nature. Their persistence arises from strong aromatic stability and resistance to biodegradation, while their lipophilicity facilitates bioaccumulation, exacerbating ecological and human health concerns. To address this challenge, this study focuses on the synthesis and characterizat...
Circular Economy implies strategies for waste valorization and reuse to produce higher-value products [1]. In this context, exhausted olive pomace, a waste biomass derived from olive industry was used to synthesize activated carbon (AC) through slow pyrolysis, followed by activation with CO2 to optimize the adsorbent's porosity. The pyrolysis furnace was initially maintained under an inert atmosphere with a nit...
Breakthrough curves are key for designing continuous flow adsorption systems, typically obtained experimentally or through modeling [1]. In this study, a mixture of activated carbon (AC) and geopolymers (GP) was tested in a continuous treatment system for the removal of model contaminants from waters in a single-component system composed of sulfamethoxazole (SMX), acetaminophen (ACT), or gallic acid (GA). In ad...
Clean water availability is becoming a matter of global concern in the last decades. The responsible entities for wastewater treatment do not have the proper facilities to deal with a wide range of pollutants. Special attention should be given to emerging contaminants, whose presence in water bodies may cause adverse effects on the aquatic ecosystem and human health. Most studies in the literature do not consid...
Groundwater is the most common source of drinking water worldwide and is currently facing contamination problems with the discharge of pollutants into aquatic systems through different means, namely through municipal, industrial and agricultural activities. Contaminants, such as herbicides, pharmaceuticals, phenolic compounds and personal care products are not removed by conventional treatments from wastewater ...
The presence of heavy metals in the environment as a consequence of human activity is an issue that has caught the attention of researchers to find wastewater treatment solutions, such as adsorption. In this work, hydrochars and activated carbon microspheres are prepared from tangerine peels as carbon precursor and FeCl3 as activating and structure-directing agent in the hydrothermal carbonization, allowing to ...
In this study, carbon-based magnetic nanoparticles (MNPs) have been prepared by sucessive sol-gel method for core bare preparation and carbon coated through polymerization of phloroglucinol/glyoxylic acid, which are greener carbon precursors than the conventional method of resorcinol/formaldehyde (R/F), since formaldehyde is known to be a carcinogenic reagent. The bare core (CoFe2O4) and the carbon-coated MNPs ...
Plastics are among the most generated solid wastes, predominantly composed by polymers, as low-density polyethylene (LDPE), high-density polyethylene (HDPE), and polypropylene (PP).1 This work deals with the preparation of magnetic carbon nanotubes (CNTs) by catalytic chemical vapor deposition (CCVD) at 850 ºC, considering LDPE, HDPE and PP as carbon precursors representative of urban plastic solid waste in a p...
A performance de nanopartículas de ferrite de cobalto, ferrite de cobalto recoberta por carbono preparada por uma metodologia tradicional e ferrite de cobalto preparada por metodologia verde foi avaliada na remoção de paracetamol (PCM), escolhido como poluente modelo, por um processo de oxidação húmida com peróxido de hidrogénio (CWPO). O núcelo magnético foi sintetizado por sol-gel, e na metodologia tradiciona...