Abstract Founding new materials and structures for solar cells is a challenge in the photovoltaic field. This work evaluated the effect of the lignin in the photovoltaic activity by compounding with TiO2/lignin as photoanode for the dye sensitized solar cells (DSSC’s). Hybrid films (TiO2/lignin) with different concentrations of lignin (5, 10 and 15%) were deposited by spin coating over commercial TiO2 thin film...
ABSTRACT Nanoparticles of TiO2 have been the main semiconductor applied in Dye-sensitized solar cells (DSSCs). In this work, solar cells were developed from the electrophoretic deposition of anatase titanium dioxide (TiO2) films on conductive glasses. The electrophoretic deposition was perfomed with a constant voltage of 80V for 2 minutes and, after drying, the films were sintered at three different temperature...
ABSTRACT Tin Zinc Oxide thin films were deposited on transparent conductive oxide by chemical bath, at percentages of 5, 10 and 15% of tin (Sn) on the zinc oxide (ZnO) structure. All films were thermally treated to improve its crystallinity. The produced films with tin were characterized by x-ray diffraction and optical measurements, such as absorbance, transmittance and reflectance. The x-ray spectrum showed t...
Abstract A low cost spin coater was constructed in this work for the deposition of thin films of titanium dioxide (TiO2) on conductive substrate of FTO (fluoride doped tin oxide) with application on dye sensitized solar cells. The results showed a 95% precision between the speed values obtained by the software of C#sharp language and the spin values observed directly on the device. The TiO2 films deposited thro...
ABSTRACT Titanate nanotubes (TiNTs) with the chemical composition Na2Ti3O7.nH2O (NaTiNT) were obtained through a hydrothermal method in highly alkaline medium. Protonated titanates nanotubes (H-TiNTs), with the composition H2Ti3O7.nH2O, were prepared by ion exchange reaction through a suspension of Na2Ti3OγnH2O nanotubes in HCl medium, promoting the exchange of Na+ ions by H+. Both Na2Ti3O7.nH2O and H2Ti3O7.nH2...
ABSTRACT The materials sizing in nano-scale is a challenge to be overcome, because the size determined by various methods differ. In order to shed light about the nanomaterials sizing, a modified Scherrer's equation was applied to estimate more accurately the nanostructured titanium dioxide crystal size. The manufactured titanium dioxide-nanostructured powder with nominal average size about 21nm was used as the...
Amongst the many parts of a silicon cells photovoltaic module, silicon is the most important and expensive constituent. Thus, research on silicon recycling from damaged cells can lead to economic and environmental benefits. In this work, the broken silicon cells were tailored to function along with the fluorine-doped tin oxide as the transparent electric conductors. The broken silicon cells were analyzed by the...
Este trabalho apresenta um modelo teórico que relaciona a potência elétrica com a potência química numa célula fotossensibilizada com corante. O mesmo é baseado na junção dos conceitos presentes nos modelos de potencial químico e de potência química. Assim, a partir destas duas considerações é possível a realização de testes sob diversas condições físicas e ambientais, durante o processo de conversão de energia...