Autor(es):
Lopes, Thiago Glissoi [UNESP] ; Rocha, Renata Maia [UNESP] ; Aguiar, Paulo Roberto De [UNESP] ; Alexandre, Felipe Aparecido [UNESP] ; Conceicao, Pedro De Oliveira [UNESP] ; Viera, Martin Antonio Aulestia [UNESP] ; Franca, Thiago Valle [UNESP]
Data: 2020
Identificador Persistente: http://hdl.handle.net/11449/201483
Origem: Oasisbr
Assunto(s): 3D printing; Pencil lead break method; Process monitoring; Temperature; 3D printing; 3D printing; Pencil lead break method; Pencil lead break method; Process monitoring; Process monitoring; Temperature; Temperature
Descrição
Made available in DSpace on 2020-12-12T02:33:38Z (GMT). No. of bitstreams: 0 Previous issue date: 2019-10-01
The pencil lead break method (PLB) is widely used on account of its efficiency in the characterization of acoustic emission sensors (AE), which are used in the monitoring of structures. The piezoelectric diaphragm (PZT) has been studied in recent years as an alternative to conventional AE sensors. The present work aims to study the influence of temperature on the piezoelectric diaphragm response for the monitoring of the 3D printing process. Fifteen PLB tests were performed on the glass surface of a 3D printer at three different temperatures. The results demonstrate that the frequency response of the sensor is directly influenced by the temperature variations. When comparing the frequency response of the signals obtained at different temperatures, it was possible to identify frequency bands that were not altered by the temperature variations. Thus, based on the results of this study, the 3D printing process can be monitored through the PZT diaphragm signals, along with the application of digital filters and signal processing.
Department of Electrical Engineering São Paulo State University - UNESP
Department of Electrical Engineering São Paulo State University - UNESP
