Publicação

Indoors geolocation based on visible light communication

Ver documento

Detalhes bibliográficos
Resumo:This paper presents the use of a selective device based on a-SiC:H/a-Si:H for the photodetection of visible signals emitted by red, green and blue emitters in a Visible Light Communication (VLC) system. The VLC system employs RGB white LEDs to provide both illumination and information transmission. The acquisition and processing of the measured photocurrent allows the identification of the induced optical excitation, which encodes the spatial position. The system is designed so that the detector’s s spatial location can be obtained based on the identification of the received optical signals. The methodology used for the photocurrent signal processing involves Fourier transform analysis for frequency identification and the use of a photodetector with spectral selective properties of wavelength identification. A full characterization of the photodetector is presented together with the physical operation that plays the key role in the detection of the output photocurrent.
Autores principais:Louro, Paula
Outros Autores:Vieira, Manuela; Vieira, Manuel Augusto
Assunto:Visible Light Communication Indoor navigation Bidirectional Communication Optical sensors Transmitter/receiver White LEDs Amorphous SiC
Ano:2020
País:Portugal
Tipo de documento:artigo
Tipo de acesso:acesso aberto
Instituição associada:Instituto Politécnico de Lisboa
Idioma:inglês
Origem:Repositório Científico do Instituto Politécnico de Lisboa
Descrição
Resumo:This paper presents the use of a selective device based on a-SiC:H/a-Si:H for the photodetection of visible signals emitted by red, green and blue emitters in a Visible Light Communication (VLC) system. The VLC system employs RGB white LEDs to provide both illumination and information transmission. The acquisition and processing of the measured photocurrent allows the identification of the induced optical excitation, which encodes the spatial position. The system is designed so that the detector’s s spatial location can be obtained based on the identification of the received optical signals. The methodology used for the photocurrent signal processing involves Fourier transform analysis for frequency identification and the use of a photodetector with spectral selective properties of wavelength identification. A full characterization of the photodetector is presented together with the physical operation that plays the key role in the detection of the output photocurrent.