Publicação

Giant magnetoelectric effect of Ni–Mn-Ga/piezopolymer composites tailored by a martensitic transformation

Ver documento

Detalhes bibliográficos
Resumo:Polymer-based magnetoelectric (ME) composites, composed of magnetostrictive and piezoelectric phases, in addition to exhibiting an effective coupling between the magnetic and electric orders of the matter, also offer important advantages for the Internet-of-Things, digitalization, and 4.0 revolution environments: light weight, flexibility, wearability, environmental friendliness, printability, and biocompatibility. Nevertheless, their successful implementation on applications such as sensors, actuators, energy harvesters, biomedical devices and spintronics strongly depends on the increase of its ME voltage response. This work explores, both experimentally and theoretically, the magnetostrictive Ni–Mn-Ga's martensite ‒ austenite phase transformation to shift/tailor/design the ME resonance peak exhibited by Ni–Mn-Ga/P(VDF-TrFE) piezoelectric composites. In the austenite phase, the determined peak value of the ME coefficient of 18.1 V cm−1 Oe−1 was much higher than the value of 6.05 V cm−1 Oe−1 obtained for the martensite phase, whereas the estimated theoretically value of magnetoelastic constant in the austenite is much smaller. The ways to further increase the magnetically induced ME response are also outlined.
Autores principais:L’vov, Victor A.
Outros Autores:Martins, Pedro Libânio Abreu; Pereira, Nelson Miguel Macedo Silva; García Díez, Ander; Hosoda, Hideki; Chernenko, Volodymyr; Lanceros-Mendez, S.
Assunto:Composites Magnetoelectrics Magnetostriction Piezoelectrics Polymers
Ano:2023
País:Portugal
Tipo de documento:artigo
Tipo de acesso:acesso aberto
Instituição associada:Universidade do Minho
Idioma:inglês
Origem:RepositóriUM - Universidade do Minho
Descrição
Resumo:Polymer-based magnetoelectric (ME) composites, composed of magnetostrictive and piezoelectric phases, in addition to exhibiting an effective coupling between the magnetic and electric orders of the matter, also offer important advantages for the Internet-of-Things, digitalization, and 4.0 revolution environments: light weight, flexibility, wearability, environmental friendliness, printability, and biocompatibility. Nevertheless, their successful implementation on applications such as sensors, actuators, energy harvesters, biomedical devices and spintronics strongly depends on the increase of its ME voltage response. This work explores, both experimentally and theoretically, the magnetostrictive Ni–Mn-Ga's martensite ‒ austenite phase transformation to shift/tailor/design the ME resonance peak exhibited by Ni–Mn-Ga/P(VDF-TrFE) piezoelectric composites. In the austenite phase, the determined peak value of the ME coefficient of 18.1 V cm−1 Oe−1 was much higher than the value of 6.05 V cm−1 Oe−1 obtained for the martensite phase, whereas the estimated theoretically value of magnetoelastic constant in the austenite is much smaller. The ways to further increase the magnetically induced ME response are also outlined.