Publicação
Sustainability assessment of half-sandwich panels based on alkali-activated ceramic/slag wastes cement versus conventional building solutions
| Resumo: | This study assessed the sustainability of two partition walls and intended to contribute to the Circular Economy in the construction sector. A life cycle approach and a multi-criteria decision support method were applied to know the environmental, functional, and economic performances of the production process of half-sandwich panels based on alkali-activated ceramic/slag waste cement, choosing as system boundary the method “cradle to gate”. The proposed building solutions differ from each other in the type of insulating material used, either extruded polystyrene foam (APXPS) or expanded cork agglomerate board (APICB). Besides, a comparative analysis of the developed building solutions versus three reference constructive solutions: i) a conventional heavyweight partition wall, ii) a lightweight gypsum wall panel, and iii) a conceptual lightweight sandwich membrane building solution was performed. Results showed that the two proposed half-sandwich wall panels (APXPS and APICB) resulted in the most sustainable alternatives, of which the APXPS obtained the best overall results since it combined the best environmental, functional, and economic behavior. Besides, the environmental contribution analysis determined that the greatest environmental burden to the Global Warming Potential (GWP), in the case of the APXPS was associated with the XPS (57%), being the alkali activator (23%) placed as the second major contributor. When the ICB was used as the insulation layer, the energy used (nearly 38%) and the sodium silicate (about 17%) were the larger contributors to CO2 emissions. It is worth mentioning that the use of ICB represented a negative contribution (of about −34%) to the GWP category. |
|---|---|
| Autores principais: | Vaca, Norma Yolanda Gaibor |
| Outros Autores: | Mateus, Ricardo; Leitão, Dinis; Cristelo, Nuno; Miranda, Tiago F. S.; Pereira, E. N. B.; Cunha, Vitor M. C. F. |
| Assunto: | Sustainability assessment Partition walls Cradle to gate Alkali-activation Ceramic wastes Engenharia e Tecnologia::Engenharia Civil Cidades e comunidades sustentáveis Produção e consumo sustentáveis |
| Ano: | 2023 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | Universidade do Minho |
| Idioma: | inglês |
| Origem: | RepositóriUM - Universidade do Minho |
Registos relacionados
school Alkali activation of ceramic solid wastes to incorporate in non-structural panels
por: Vaca, Norma Yolanda Gaibor
Publicado em: (2022)
por: Vaca, Norma Yolanda Gaibor
Publicado em: (2022)
article Effect of polyacrylonitrile fiber on the properties of alkali-activated ceramic/slag-based mortar
por: Gaibor, N. Y.
Publicado em: (2022)
por: Gaibor, N. Y.
Publicado em: (2022)
article Fiber-reinforced alkali-activated cements from ceramic waste and ladle furnace slag without thermal curing
por: Gaibor, Norma
Publicado em: (2023)
por: Gaibor, Norma
Publicado em: (2023)
article Effect of curing conditions on compressive strength behavior on alkali-activated ceramic wastes
por: Vaca, Norma Yolanda Gaibor
Publicado em: (2021)
por: Vaca, Norma Yolanda Gaibor
Publicado em: (2021)
article Impact of life cycle assessment analysis on energy efficiency projects in Mediterranean residential buildings
por: Almeida, Manuela Guedes de
Publicado em: (2024)
por: Almeida, Manuela Guedes de
Publicado em: (2024)
book Just-in-time production and eco-efficiency
por: Moreira, Francisco
Publicado em: (2023)
por: Moreira, Francisco
Publicado em: (2023)
article Development of alkali activated ceramic residue and fly ash blends
por: Gaibor, N.
Publicado em: (2020)
por: Gaibor, N.
Publicado em: (2020)
article Natural volcanic pozzolan-and granulated blast furnace slag-based alkali-activated repair mortar
por: Robayo-Salazar, R.
Publicado em: (2019)
por: Robayo-Salazar, R.
Publicado em: (2019)
groups Análise de ciclo de vida do azeite transmontano
por: Cunha, Mário Sérgio Vieira da
Publicado em: (2015)
por: Cunha, Mário Sérgio Vieira da
Publicado em: (2015)
article Constitutive behaviour of a clay stabilised with alkali-activated cement based on blast furnace slag
por: Silva, Manuela Corrêa Alves
Publicado em: (2022)
por: Silva, Manuela Corrêa Alves
Publicado em: (2022)
article Alkali activation of recycled ceramic aggregates from construction and demolition wastes
por: Gaibor, N. Y.
Publicado em: (2020)
por: Gaibor, N. Y.
Publicado em: (2020)
article Weights of embodied energy and carbon emissions in an energy retrofit of the building envelope: Assessment for a Mediterranean residential building
por: Almeida, Manuela Guedes de
Publicado em: (2023)
por: Almeida, Manuela Guedes de
Publicado em: (2023)
article Internal curing by superabsorbent polymers in alkali-activated slag
por: Li, Zhenming
Publicado em: (2020)
por: Li, Zhenming
Publicado em: (2020)
article Performance of eco-friendly cement mortars incorporating ceramic molds shells and paraffin wax
por: Cunha, Sandra Raquel Leite
Publicado em: (2023)
por: Cunha, Sandra Raquel Leite
Publicado em: (2023)
article Stabilisation of a plastic soil with alkali activated cements developed from industrial wastes
por: Cristelo, Nuno
Publicado em: (2021)
por: Cristelo, Nuno
Publicado em: (2021)
book Handbook of advances in Alkali-activated Concrete
por: Pacheco-Torgal, F.
Publicado em: (2021)
por: Pacheco-Torgal, F.
Publicado em: (2021)
category Cradle-to-gate assessment of bacterial cellulose production
por: Forte, Ana
Publicado em: (2019)
por: Forte, Ana
Publicado em: (2019)
category Life cycle assessment (cradle-to-gate) of bacterial cellulose production
por: Forte, Ana Cristina Figueiras
Publicado em: (2019)
por: Forte, Ana Cristina Figueiras
Publicado em: (2019)
article Multi-objective design optimization of sandwich panel
por: Benzo, Pier Giovanni
Publicado em: (2022)
por: Benzo, Pier Giovanni
Publicado em: (2022)
article Stabilisation of estuarine sediments with an alkali-activated cement for deep soil mixing applications
por: Pinheiro, Claver Giovanni Silveira
Publicado em: (2024)
por: Pinheiro, Claver Giovanni Silveira
Publicado em: (2024)
article Optimization of steel web core sandwich panel with genetic algorithm
por: Benzo, Pier Giovanni
Publicado em: (2022)
por: Benzo, Pier Giovanni
Publicado em: (2022)
article A new lightweight floor system based on sandwich panel
por: Benzo, Pier Giovanni
Publicado em: (2022)
por: Benzo, Pier Giovanni
Publicado em: (2022)
article Cost and environmental performance of waste based alkali-activated mortars
por: Abdollahnejad, Zahra
Publicado em: (2019)
por: Abdollahnejad, Zahra
Publicado em: (2019)
article Internal curing of alkali-activated slag-fly ash paste with superabsorbent polymers
por: Li, Zhenming
Publicado em: (2020)
por: Li, Zhenming
Publicado em: (2020)
article Physical and mechanical properties of lightweight concrete with incorporation of ceramic mold casting waste
por: Jia, Zhiyou
Publicado em: (2023)
por: Jia, Zhiyou
Publicado em: (2023)
book Performance of alkali-activated mortars for the repair and strengthening of OPC concrete
por: Pacheco-Torgal, F.
Publicado em: (2015)
por: Pacheco-Torgal, F.
Publicado em: (2015)
article Leveraging ML for predicting UCS of soil stabilised with one-part alkali-activated binder
por: Tinoco, Joaquim
Publicado em: (2025)
por: Tinoco, Joaquim
Publicado em: (2025)
category Cement mortars with incorporation of foundry industry wastes: physical, mechanical and durability behavior
por: Cunha, Sandra Raquel Leite
Publicado em: (2023)
por: Cunha, Sandra Raquel Leite
Publicado em: (2023)
article Physical and mechanical characterization of polyurethane foam core of sandwich panels of various densities
por: Benzo, Pier Giovanni
Publicado em: (2022)
por: Benzo, Pier Giovanni
Publicado em: (2022)
article Using foundry slag of ferrous metals as fine aggregate for concrete
por: Cardoso, César José Lopes
Publicado em: (2018)
por: Cardoso, César José Lopes
Publicado em: (2018)
article Spectroscopic and microscopic study of alkali activated mortars based on Tunisian phosphate washing waste
por: Dabbebi, R.
Publicado em: (2020)
por: Dabbebi, R.
Publicado em: (2020)
category Photonic system for in-situ monitoring of N-P-K soil macronutrients
por: Machado, Ricardo Jorge Osório
Publicado em: (2026)
por: Machado, Ricardo Jorge Osório
Publicado em: (2026)
article Cyclic quasi-static testing of a half-scale, two-story unreinforced masonry building with structural irregularity
por: Asikoglu, Abide
Publicado em: (2022)
por: Asikoglu, Abide
Publicado em: (2022)
article Materiais sustentáveis para a indústria da moda através do processo de downcycling
por: Costa, Junior
Publicado em: (2022)
por: Costa, Junior
Publicado em: (2022)
article Predicting the mechanical behaviour of a sandy clay stabilised with an alkali-activated binder
por: Corrêa-Silva, Manuela
Publicado em: (2021)
por: Corrêa-Silva, Manuela
Publicado em: (2021)
article Durability of alkali-activated binders: a clear advantage over Portland cement or an unproven issue?
por: Pacheco-Torgal, F.
Publicado em: (2012)
por: Pacheco-Torgal, F.
Publicado em: (2012)
article Quasi-static test on a half-scale two-story URM building: mechanical chracterization [i. é characterization] of materials
por: Asikoglu, Abide
Publicado em: (2021)
por: Asikoglu, Abide
Publicado em: (2021)
article Mortars with the incorporation of treated ceramic molds shells wastes
por: Cunha, Sandra Raquel Leite
Publicado em: (2023)
por: Cunha, Sandra Raquel Leite
Publicado em: (2023)
book Improving the road safety and the service life of road markings through self-cleaning ability
por: Júnior, Orlando Sousa Lima
Publicado em: (2024)
por: Júnior, Orlando Sousa Lima
Publicado em: (2024)
description Bio-based construction materials in the context of the EU bioeconomy: overcoming systemic barriers to mainstream adoption
por: Pacheco-Torgal, F.
Publicado em: (2026)
por: Pacheco-Torgal, F.
Publicado em: (2026)
Registos relacionados
-
school Alkali activation of ceramic solid wastes to incorporate in non-structural panels
por: Vaca, Norma Yolanda Gaibor
Publicado em: (2022) -
article Effect of polyacrylonitrile fiber on the properties of alkali-activated ceramic/slag-based mortar
por: Gaibor, N. Y.
Publicado em: (2022) -
article Fiber-reinforced alkali-activated cements from ceramic waste and ladle furnace slag without thermal curing
por: Gaibor, Norma
Publicado em: (2023) -
article Effect of curing conditions on compressive strength behavior on alkali-activated ceramic wastes
por: Vaca, Norma Yolanda Gaibor
Publicado em: (2021) -
article Impact of life cycle assessment analysis on energy efficiency projects in Mediterranean residential buildings
por: Almeida, Manuela Guedes de
Publicado em: (2024)