Publicação
The effects of elevated temperature on the bond behaviour of sand coated GFRP bars to concrete – Definition of bond vs. slip relations
| Resumo: | The use of glass fibre reinforced polymer (GFRP) bars as internal reinforcement of concrete structures has been growing, mainly due to the advantages they present over steel reinforcement, namely their low weight, high strength and corrosion resistance. However, at moderately elevated temperatures, especially when approaching the glass transition temperature (Tg) of the polymeric matrix (usually between 65 and 150 °C), the stiffness, strength and bond properties of these rebars are known to be significantly degraded. The first part of this paper presents an experimental investigation comprising tensile and pull-out tests on sand coated GFRP rebars at elevated temperatures under steady-state conditions; the tensile tests were carried out up to 300 °C, whereas the pull-out tests were performed up to 140 °C (measured at the GFRP-concrete interface); two embedment lengths of the rebars were considered. The obtained results confirmed that the stiffness and strength of the GFRP-concrete interface are significantly reduced with temperature increase, especially when the Tg of the GFRP rebars is approached and exceeded. In the second part of the paper, analytical bond vs. slip relations for the GFRP-concrete interface are proposed for each of the tested temperatures; the defining parameters of these local laws were calibrated with the experimental data from the pull-out tests. Moreover, the accuracy of two empirical (relaxation) models in predicting the GFRP-concrete bond strength reduction with temperature was also assessed |
|---|---|
| Autores principais: | Rosa, I. C. |
| Outros Autores: | Firmo, J. P.; Correia, J. R.; Barros, Joaquim A. O. |
| Assunto: | A. Glass fibres B. Adhesion B. High-temperature properties D. Mechanical testing Glass fibres Adhesion High-temperature properties Mechanical testing Engenharia e Tecnologia::Engenharia Civil |
| Ano: | 2019 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | Universidade do Minho |
| Idioma: | inglês |
| Origem: | RepositóriUM - Universidade do Minho |
Registos relacionados
article Numerical calibration of bond laws for GFRP bars embedded in steel fiber-reinforced self-compacting concrete
por: Pepe, M.
Publicado em: (2013)
por: Pepe, M.
Publicado em: (2013)
article Experimental assessment of an innovative strengthening material for brick masonry infills
por: Martins, Andreia Piedade Gomes
Publicado em: (2015)
por: Martins, Andreia Piedade Gomes
Publicado em: (2015)
article Behaviour of the adhesive bond between low-grade wood and GFRP reinforcements using epoxy resin
por: Balmori, J. A.
Publicado em: (2021)
por: Balmori, J. A.
Publicado em: (2021)
article Bond behavior between glulam and GFRP's by pullout tests
por: Sena-Cruz, José
Publicado em: (2012)
por: Sena-Cruz, José
Publicado em: (2012)
article Mechanical behavior of concrete prisms reinforced with steel and GFRP bar systems
por: Rimkus, Arvydas
Publicado em: (2019)
por: Rimkus, Arvydas
Publicado em: (2019)
article Mechanical performance of natural fiber-reinforced composites for the strengthening of masonry
por: Codispoti, R.
Publicado em: (2015)
por: Codispoti, R.
Publicado em: (2015)
article Producing LFT composite parts for large consumption markets from thermoplastic powder-coated towpregs
por: Nunes, J. P.
Publicado em: (2015)
por: Nunes, J. P.
Publicado em: (2015)
article Oriented fibrous structures for concrete reinforcement
por: Fangueiro, Raúl
Publicado em: (2010)
por: Fangueiro, Raúl
Publicado em: (2010)
article Experimental study of structural adhesives for a steel-glass connection
por: Cruz, Paulo J. S.
Publicado em: (2014)
por: Cruz, Paulo J. S.
Publicado em: (2014)
article Design formula to evaluate the NSM FRP strips shear strength contribution to a RC beam
por: Bianco, V.
Publicado em: (2014)
por: Bianco, V.
Publicado em: (2014)
article High temperatures behaviour of mortars with incorporation of phase change materials
por: Cunha, Sandra Raquel Leite
Publicado em: (2014)
por: Cunha, Sandra Raquel Leite
Publicado em: (2014)
article Ribbon fibres from naphtalene-based mesophase: Surface studies and fibre/matrix interactions in polycarbonate composites
por: Paiva, M. C.
Publicado em: (1998)
por: Paiva, M. C.
Publicado em: (1998)
article Relation between fiber orientation and mechanical properties of nano-engineered poly(vinylidene fluoride) electrospun composite fiber mats
por: Maciel, M. M.
Publicado em: (2018)
por: Maciel, M. M.
Publicado em: (2018)
article Experimental assessment of the thermo-mechanical bond behavior of NSM CFRP with cement-based adhesives
por: Mohammadifirouz, Reza
Publicado em: (2023)
por: Mohammadifirouz, Reza
Publicado em: (2023)
article Mechanical, surface and interfacial characterisation of pitch and PAN-based carbon fibres
por: Paiva, M. C.
Publicado em: (2000)
por: Paiva, M. C.
Publicado em: (2000)
assignment Bond characterization between concrete base and repairing SFRC by pull-off tests
por: Bonaldo, Everaldo
Publicado em: (2004)
por: Bonaldo, Everaldo
Publicado em: (2004)
article Polypropylene-based cork-polymer composites: processing parameters and properties
por: Fernandes, E. M.
Publicado em: (2014)
por: Fernandes, E. M.
Publicado em: (2014)
article Alfa fibres : mechanical, morphological and interfacial characterization
por: Paiva, M. C.
Publicado em: (2007)
por: Paiva, M. C.
Publicado em: (2007)
article On bonding repairing steel fibre reinforced concrete to hardened concrete
por: Bonaldo, Everaldo
Publicado em: (2005)
por: Bonaldo, Everaldo
Publicado em: (2005)
article Processing and properties of bone-analogue biodegradable and bioinert polymeric composites
por: Sousa, R. A.
Publicado em: (2003)
por: Sousa, R. A.
Publicado em: (2003)
article A theoretical and experimental study of new towpreg-based long fibre thermoplastic composites
por: Hattum, F. W. J. van
Publicado em: (2005)
por: Hattum, F. W. J. van
Publicado em: (2005)
article Development of polyhydroxyalkanoates/poly(lactic acid) composites reinforced with cellulosic fibers
por: Loureiro, N. C.
Publicado em: (2014)
por: Loureiro, N. C.
Publicado em: (2014)
article Fire behaviour of a fibre reinforced concrete tunnel segments
por: Alves, Adérito
Publicado em: (2007)
por: Alves, Adérito
Publicado em: (2007)
article Electrospun styrene-butadiene-styrene elastomer copolymers for tissue engineering applications: Effect of butadiene/styrene ratio, block structure, hydrogenation and carbon nanotube loading on physical properties and cytotoxicity
por: Ribeiro, S.
Publicado em: (2014)
por: Ribeiro, S.
Publicado em: (2014)
article The effect of brazing temperature on the titanium/glass-ceramic bonding
por: Guedes, A.
Publicado em: (1999)
por: Guedes, A.
Publicado em: (1999)
category Creep modelling for refractory materials used in furnace linings
por: Soares, Thais
Publicado em: (2019)
por: Soares, Thais
Publicado em: (2019)
article Flexural strengthening of reinforced low strength concrete slabs using prestressed NSM CFRP laminates
por: Hosseini, Mhoammadreza Mostakhdemin
Publicado em: (2016)
por: Hosseini, Mhoammadreza Mostakhdemin
Publicado em: (2016)
article Development, characterization and analysis of auxetic structures from braided composites and study the influence of material and structural parameters
por: Magalhães, Rui
Publicado em: (2016)
por: Magalhães, Rui
Publicado em: (2016)
category The effect of morphology on the properties of vapour-grown carbon fibres
por: Hattum, F. W. J. van
Publicado em: (1997)
por: Hattum, F. W. J. van
Publicado em: (1997)
article Cementitious composites reinforced with polypropylene, nylon and polyacrylonitile fibres
por: Pakravan, H. R.
Publicado em: (2011)
por: Pakravan, H. R.
Publicado em: (2011)
article Cementitious composites reinforced with polypropylene, nylon and polyacrylonitile fibres
por: Pakravan, H. R.
Publicado em: (2013)
por: Pakravan, H. R.
Publicado em: (2013)
article Production and Assessment of Polycarbonate Composites Reinforced with Vapour-Grown Carbon Fibres
por: Carneiro, O. S.
Publicado em: (1998)
por: Carneiro, O. S.
Publicado em: (1998)
article A novel technique for the interfacial characterization of glass fiber-polypropylene systems
por: Fonseca, S. Cabral
Publicado em: (2003)
por: Fonseca, S. Cabral
Publicado em: (2003)
article Morphological, Mechanical and Interfacial Analysis of Vapour-Grown Carbon Fibres
por: Hattum, F. W. J. van
Publicado em: (1997)
por: Hattum, F. W. J. van
Publicado em: (1997)
article Durability of bond in NSM CFRP-concrete systems under different environmental conditions
por: Fernandes, Pedro Miguel Gomes
Publicado em: (2018)
por: Fernandes, Pedro Miguel Gomes
Publicado em: (2018)
article Water degrading effects on the bond behavior in FRP-strengthened masonry
por: Ghiassi, Bahman
Publicado em: (2013)
por: Ghiassi, Bahman
Publicado em: (2013)
article Development of sustainable and innovative manhole covers in fibre-reinforced concrete and GFRP grating
por: Barros, Joaquim A. O.
Publicado em: (2024)
por: Barros, Joaquim A. O.
Publicado em: (2024)
article Thermo-mechanical properties of commercially available epoxy resins for structural applications
por: Michels, Julien
Publicado em: (2015)
por: Michels, Julien
Publicado em: (2015)
article Mechanical performance of concrete made of steel fibers from tire waste
por: Samarakoon, S. M. Samindi M. K.
Publicado em: (2019)
por: Samarakoon, S. M. Samindi M. K.
Publicado em: (2019)
category A study of the effect of plasma treatment on the interfacial properties of carbon fibre–thermoplastic composites
por: Montes-Morán, M. A.
Publicado em: (2005)
por: Montes-Morán, M. A.
Publicado em: (2005)
Registos relacionados
-
article Numerical calibration of bond laws for GFRP bars embedded in steel fiber-reinforced self-compacting concrete
por: Pepe, M.
Publicado em: (2013) -
article Experimental assessment of an innovative strengthening material for brick masonry infills
por: Martins, Andreia Piedade Gomes
Publicado em: (2015) -
article Behaviour of the adhesive bond between low-grade wood and GFRP reinforcements using epoxy resin
por: Balmori, J. A.
Publicado em: (2021) -
article Bond behavior between glulam and GFRP's by pullout tests
por: Sena-Cruz, José
Publicado em: (2012) -
article Mechanical behavior of concrete prisms reinforced with steel and GFRP bar systems
por: Rimkus, Arvydas
Publicado em: (2019)