Publicação
Mechanical performance and microstructual investigation of binary and ternary lime binders with silica fume and metakaolin
| Resumo: | The increasing demand for sustainable building products with lower carbon footprint is a huge global challenge that can hardly be faced by conventional cementitious mixtures. In this context, the use of alternative primary binders, such as hydraulic lime, should be explored. Research in this direction should aim at the development of innovative eco-friendly materials with suitable mechanical performance. For the retrofitting of masonry structures, for instance, it may be necessary to improve their mechanical properties by incorporating supplementary cementitious materials (SCMs), further reducing, at the same time, their environmental impact. This study investigates the effects of silica fume and metakaolin included either individually or together alongside natural hydraulic lime. The mechanical performance of such binary and ternary binders has been characterized in terms of flexural and compressive strength. Moreover, scanning electron microscopy (SEM) has been used to study the microstructure of the mixtures. Finally, a preliminary investigation concerning the effect of curing time in lime-based mixtures with combined silica fume and metakaolin has been performed to investigate the possible benefits of this approach. The results highlight the superior pozzolanic efficacy of silica fume compared to metakaolin and point towards the proper dosages of SCMs to achieve optimal mechanical performance. |
|---|---|
| Autores principais: | Penazzato, Luca |
| Outros Autores: | Illampas, Rogiros; Rigopoulos, Ioannis; Ioannou, Ioannis; Oliveira, Daniel V. |
| Assunto: | curing age mechanical properties mortars natural hydraulic lime scanning electron microscopy supplementary cementitious materials sustainable materials |
| Ano: | 2024 |
| País: | Portugal |
| Tipo de documento: | comunicação em conferência |
| Tipo de acesso: | acesso restrito |
| Instituição associada: | Universidade do Minho |
| Idioma: | inglês |
| Origem: | RepositóriUM - Universidade do Minho |
Registos relacionados
article Assessment of the efficiency of mechanical grinding and calcination processes for construction and demolition waste as binder replacement in cement pastes: mechanical properties evaluation
por: Cunha, Sandra Raquel Leite
Publicado em: (2025)
por: Cunha, Sandra Raquel Leite
Publicado em: (2025)
article Applications of sustainable polymer-based phase change materials in mortars composed by different binders
por: Frigione, Mariaenrica
Publicado em: (2019)
por: Frigione, Mariaenrica
Publicado em: (2019)
article Comparative sustainability assessment of binary blended concretes using Supplementary Cementitious Materials (SCMs) and Ordinary Portland Cement (OPC)
por: Rahla, Kamel Mohamed
Publicado em: (2019)
por: Rahla, Kamel Mohamed
Publicado em: (2019)
article A comprehensive approach for designing low carbon wood bio-concretes
por: Gloria, M’hamed Y. R.
Publicado em: (2024)
por: Gloria, M’hamed Y. R.
Publicado em: (2024)
book Hydraulic binders
por: Costa, Carla
Publicado em: (2015)
por: Costa, Carla
Publicado em: (2015)
article Compressed earth blocks using metakaolin and lime with antifungicide additions
por: Eires, R.
Publicado em: (2009)
por: Eires, R.
Publicado em: (2009)
article Thermal performance of mortars based on different binders and containing a novel sustainable Phase Change Material (PCM)
por: Sarcinella, Antonella
Publicado em: (2020)
por: Sarcinella, Antonella
Publicado em: (2020)
article Fresh state characterization of lime mortars with PCM additions
por: Lucas, S.
Publicado em: (2010)
por: Lucas, S.
Publicado em: (2010)
science Optimisation of hydraulic lime mortars incorporating an oil-refinery catalyst by-product for sustainable building rehabilitation
por: Costa, Carla
Publicado em: (2026)
por: Costa, Carla
Publicado em: (2026)
article Fineness effect evaluation on the mechanical activity index of glass powder
por: Jesus, Carlos Manuel Gonçalves
Publicado em: (2025)
por: Jesus, Carlos Manuel Gonçalves
Publicado em: (2025)
article Use of phase change materials microcapsules in aerial lime and gypsum mortars
por: Cunha, Sandra Raquel Leite
Publicado em: (2012)
por: Cunha, Sandra Raquel Leite
Publicado em: (2012)
article Use of phase change materials microcapsules in aerial lime and gypsum mortars
por: Cunha, Sandra Raquel Leite
Publicado em: (2011)
por: Cunha, Sandra Raquel Leite
Publicado em: (2011)
article Mapping and holistic design of natural hydraulic lime mortars
por: Apostolopoulou, Maria
Publicado em: (2020)
por: Apostolopoulou, Maria
Publicado em: (2020)
article Development of an eco-friendly lime-based mortar suitable for integrated retrofitting: thermophysical and mechanical characterization
por: Penazzato, Luca
Publicado em: (2024)
por: Penazzato, Luca
Publicado em: (2024)
article Impact of moisture curing conditions on mechanical properties of lime-cement mortars in early ages
por: Ramesh, Meera
Publicado em: (2019)
por: Ramesh, Meera
Publicado em: (2019)
article Mechanical properties of lime–cement masonry mortars in their early ages
por: Ramesh, Meera
Publicado em: (2019)
por: Ramesh, Meera
Publicado em: (2019)
article Contribution of loamy soil treatment to improve embankments performance
por: De Bel, Régis
Publicado em: (2009)
por: De Bel, Régis
Publicado em: (2009)
article Effects of curing conditions on crack bridging response of PVA reinforced cementitious matrix
por: Esmaeeli, Esmaeel
Publicado em: (2012)
por: Esmaeeli, Esmaeel
Publicado em: (2012)
article Thermal mortars : contribution of the incorporation of PCM microcapsules
por: Cunha, Sandra Raquel Leite
Publicado em: (2012)
por: Cunha, Sandra Raquel Leite
Publicado em: (2012)
article Thermal mortars with incorporation of PCM microcapsules
por: Cunha, Sandra Raquel Leite
Publicado em: (2013)
por: Cunha, Sandra Raquel Leite
Publicado em: (2013)
article Thermal properties of PEG-based form-stable Phase Change Materials (PCMs) incorporated in mortars for energy efficiency of buildings
por: Sarcinella, Antonella
Publicado em: (2023)
por: Sarcinella, Antonella
Publicado em: (2023)
article Toughness of natural hydraulic lime fibre-reinforced mortars for masonry strengthening overlay systems
por: Almeida, João Alberto Pinheiro Pereira
Publicado em: (2024)
por: Almeida, João Alberto Pinheiro Pereira
Publicado em: (2024)
book Open-source EMM-ARM implementation for mortars based on single-board computer
por: Russo, Thomas Vincent Jacques
Publicado em: (2023)
por: Russo, Thomas Vincent Jacques
Publicado em: (2023)
article Physical properties of an eco-sustainable, form-stable phase change material included in aerial-lime-based mortar intended for different climates
por: Sarcinella, Antonella
Publicado em: (2022)
por: Sarcinella, Antonella
Publicado em: (2022)
article Influence of incorporation phase change materials, PCM, granulates on workability, mechanical strength and aesthetical appearance of lime and gypsum mortars
por: Cunha, Sandra Raquel Leite
Publicado em: (2013)
por: Cunha, Sandra Raquel Leite
Publicado em: (2013)
article Feasibility of eco-friendly binary and ternary blended binders made of fly-ash and oil-refinery spent catalyst in ready-mixed concrete production
por: Costa, Carla
Publicado em: (2018)
por: Costa, Carla
Publicado em: (2018)
article Tensile strain hardening of a metakaolin based fibre reinforced composite
por: Ferreira, Bárbara Daniela da Costa
Publicado em: (2016)
por: Ferreira, Bárbara Daniela da Costa
Publicado em: (2016)
article Influence of freeze–thaw cycles on the pull-out response of lime-based TRM composites
por: Esfahani, Ali Dalalbashi
Publicado em: (2021)
por: Esfahani, Ali Dalalbashi
Publicado em: (2021)
article Effect of hybrid fiber reinforcement on the cracking process in fiber reinforced cementitious composites
por: Pereira, E. N. B.
Publicado em: (2012)
por: Pereira, E. N. B.
Publicado em: (2012)
article Measurement of the E-modulus of cement pastes and mortars since casting, using a vibration based technique
por: Azenha, Miguel
Publicado em: (2012)
por: Azenha, Miguel
Publicado em: (2012)
article Sustainable polymer-based phase change materials for energy efficiency in buildings and their application in aerial lime mortars
por: Frigione, M.
Publicado em: (2020)
por: Frigione, M.
Publicado em: (2020)
school ECO: argamassas de cal hidráulica para reabilitação de edifícios
por: Paiva, Miguel Sobral de
Publicado em: (2015)
por: Paiva, Miguel Sobral de
Publicado em: (2015)
article Some considerations about the use of lime-cement mortars for building conservation purposes in Portugal : a reprehensible option or a lesser evil?
por: Pacheco-Torgal, F.
Publicado em: (2012)
por: Pacheco-Torgal, F.
Publicado em: (2012)
article Assessment of behaviour and cracking susceptibility of cementitious systems under restrained conditions through ring tests: a critical review
por: Kanavaris, Fragkoulis
Publicado em: (2019)
por: Kanavaris, Fragkoulis
Publicado em: (2019)
article Natural fibre reinforced earth and lime based mortars
por: Cardoso, César
Publicado em: (2013)
por: Cardoso, César
Publicado em: (2013)
article Luminescence dating of lime mortars to measure pollution rates
por: Sanjurjo-Sánchez, J.
Publicado em: (2011)
por: Sanjurjo-Sánchez, J.
Publicado em: (2011)
article Method for evaluating self-healing capabilities of cementitious materials by assessing permeability changes in holes of defined size
por: Kuzminov, Oleg
Publicado em: (2025)
por: Kuzminov, Oleg
Publicado em: (2025)
article Properties of lime based thermal mortars
por: Lucas, Sandra S.
Publicado em: (2011)
por: Lucas, Sandra S.
Publicado em: (2011)
article Eco-efficient ternary mixtures incorporating fly ash and metakaolin
por: Reis, Rui
Publicado em: (2011)
por: Reis, Rui
Publicado em: (2011)
category Evaluation of alternative alkali pretreatment for oat straw saccharification and fermentation
por: Romaní, Aloia
Publicado em: (2016)
por: Romaní, Aloia
Publicado em: (2016)
Registos relacionados
-
article Assessment of the efficiency of mechanical grinding and calcination processes for construction and demolition waste as binder replacement in cement pastes: mechanical properties evaluation
por: Cunha, Sandra Raquel Leite
Publicado em: (2025) -
article Applications of sustainable polymer-based phase change materials in mortars composed by different binders
por: Frigione, Mariaenrica
Publicado em: (2019) -
article Comparative sustainability assessment of binary blended concretes using Supplementary Cementitious Materials (SCMs) and Ordinary Portland Cement (OPC)
por: Rahla, Kamel Mohamed
Publicado em: (2019) -
article A comprehensive approach for designing low carbon wood bio-concretes
por: Gloria, M’hamed Y. R.
Publicado em: (2024) -
book Hydraulic binders
por: Costa, Carla
Publicado em: (2015)