Autor(es):
Siqueira, Lilian de ; Ribeiro, Nilza ; Paredes, Maria B. A. ; Grenho, Liliana ; Cunha-Reis, Cassilda ; Trichês, Eliandra S. ; Fernandes, Maria H. ; Sousa, Susana R. ; Monteiro, Fernando J.
Data: 2019
Identificador Persistente: http://hdl.handle.net/10400.14/28957
Origem: Veritati - Repositório Institucional da Universidade Católica Portuguesa
Assunto(s): Bone-like biomaterial; PLLA/PCL/HA scaffolds; Nanohydroxyapatite; Electrospinning/electrospraying technique; Random and aligned fibers; Mechanical properties; Osteoblasts
Descrição
Scaffolds based on aligned and non-aligned poly (L-lactic acid) (PLLA)/polycaprolactone (PCL) fibers obtained by electrospinning, associated to electrosprayed hydroxyapatite (HA) for tissue engineering applications were developed and their performance was compared in terms of their morphology and biological and mechanical behaviors. The morphological results assessed by scanning electron microscopy showed a mesh of PLLA/PCL fibers (random and perfectly aligned) associated with aggregates of nanophased HA. Fourier transform infrared spectrometry confirmed the homogeneity in the blends and the presence of nanoHA in the scaffold. As a result of fiber alignment a 15-fold increase in Young’s Modulus and an 8-fold increase in tensile strength were observed when compared to non-aligned fibers. In PLLA/PCL/HA scaffolds, the introduction of nanoHA caused a remarkable improvement of the mechanical strength of this material acting as a reinforcement, enhancing the response of these constructs to tensile stress. In vitro testing was evaluated using osteoblast (MC3T3-E1) cells. The results showed that both fibrous scaffolds were able to support osteoblast cell adhesion and proliferation and that fiber alignment induced increased cellular metabolic activity. In addition, the adhesion and proliferation of Staphylococcus aureus were evaluated and a lower number of colony forming units (CFUs) was obtained in the scaffolds with aligned fibers.
