Publicação
Sheet metal forming by numerical simulations: 2D and 3D axisymmetric deformation of a cylindrical piece
| Resumo: | Until few years ago, design of sheet metal forming was based on knowledge through work experience and expensive trial and error process. Nowadays the use of numerical simulations in different phases of the sheet metal forming process are performed using finite element analysis (Ranganath et al, 2012). Different codes are available for finite element analysis in metal forming such as Abaqus, Dynaform, Nike 2D, Ansys, etc. Deep drawing is the metalworking process used for stamping flat sheets into cup-shaped forms, where the metal is subjected to different types of deformations (Dieter, 1961). The aim of this work is conduct numerical simulations to verify the deep drawing process and the shape of the final stamping component of a simple profile of a sheet metal geometry. To evaluate the design of sheet metal forming, a nonlinear dynamic explicit numerical model was developed using two models: a 3D quarter and a 2D axisymmetric finite element model, due the geometry and loading conditions symmetry to reduce the computational time processing. The numerical simulations showed the shape deformation occurring after start the process and provided detailed quantitative information about expected weakness of the resulting piece. |
|---|---|
| Autores principais: | Mouta, K. |
| Outros Autores: | Azevedo, Lucas D.; Fernandes, M.G.A.; Fonseca, E.M.M. |
| Ano: | 2017 |
| País: | Portugal |
| Tipo de documento: | póster em conferência |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | Instituto Politécnico de Bragança |
| Idioma: | inglês |
| Origem: | Biblioteca Digital do IPB |
| _version_ | 1867173366795862016 |
|---|---|
| author | Mouta, K. |
| author2 | Azevedo, Lucas D. Fernandes, M.G.A. Fonseca, E.M.M. |
| author2_role | author author author |
| author_facet | Mouta, K. Azevedo, Lucas D. Fernandes, M.G.A. Fonseca, E.M.M. |
| author_role | author |
| contributor_name_str_mv | Biblioteca Digital do IPB |
| country_str | PT |
| creators_json_txt | [{\"Person.name\":\"Mouta, K.\"},{\"Person.name\":\"Azevedo, Lucas D.\"},{\"Person.name\":\"Fernandes, M.G.A.\"},{\"Person.name\":\"Fonseca, E.M.M.\",\"Person.identifier.orcid\":\"0000-0003-1854-6514\"}] |
| datacite.contributors.contributor.contributorName.fl_str_mv | Biblioteca Digital do IPB |
| datacite.creators.creator.creatorName.fl_str_mv | Mouta, K. Azevedo, Lucas D. Fernandes, M.G.A. Fonseca, E.M.M. |
| datacite.date.Accepted.fl_str_mv | 2017-01-01T00:00:00Z |
| datacite.date.available.fl_str_mv | 2018-04-24T15:16:11Z |
| datacite.date.embargoed.fl_str_mv | 2018-04-24T15:16:11Z |
| datacite.rights.fl_str_mv | http://purl.org/coar/access_right/c_abf2 |
| datacite.titles.title.fl_str_mv | Sheet metal forming by numerical simulations: 2D and 3D axisymmetric deformation of a cylindrical piece |
| dc.contributor.none.fl_str_mv | Biblioteca Digital do IPB |
| dc.creator.none.fl_str_mv | Mouta, K. Azevedo, Lucas D. Fernandes, M.G.A. Fonseca, E.M.M. |
| dc.date.Accepted.fl_str_mv | 2017-01-01T00:00:00Z |
| dc.date.available.fl_str_mv | 2018-04-24T15:16:11Z |
| dc.date.embargoed.fl_str_mv | 2018-04-24T15:16:11Z |
| dc.format.none.fl_str_mv | application/pdf |
| dc.identifier.none.fl_str_mv | http://hdl.handle.net/10198/17267 |
| dc.language.none.fl_str_mv | eng |
| dc.rights.cclincense.fl_str_mv | http://creativecommons.org/licenses/by/4.0/ |
| dc.rights.none.fl_str_mv | http://purl.org/coar/access_right/c_abf2 |
| dc.title.fl_str_mv | Sheet metal forming by numerical simulations: 2D and 3D axisymmetric deformation of a cylindrical piece |
| dc.type.none.fl_str_mv | http://purl.org/coar/resource_type/c_6670 |
| description | Until few years ago, design of sheet metal forming was based on knowledge through work experience and expensive trial and error process. Nowadays the use of numerical simulations in different phases of the sheet metal forming process are performed using finite element analysis (Ranganath et al, 2012). Different codes are available for finite element analysis in metal forming such as Abaqus, Dynaform, Nike 2D, Ansys, etc. Deep drawing is the metalworking process used for stamping flat sheets into cup-shaped forms, where the metal is subjected to different types of deformations (Dieter, 1961). The aim of this work is conduct numerical simulations to verify the deep drawing process and the shape of the final stamping component of a simple profile of a sheet metal geometry. To evaluate the design of sheet metal forming, a nonlinear dynamic explicit numerical model was developed using two models: a 3D quarter and a 2D axisymmetric finite element model, due the geometry and loading conditions symmetry to reduce the computational time processing. The numerical simulations showed the shape deformation occurring after start the process and provided detailed quantitative information about expected weakness of the resulting piece. |
| dirty | 0 |
| eu_rights_str_mv | openAccess |
| format | conferencePoster |
| fulltext.url.fl_str_mv | https://bibliotecadigital.ipb.pt/bitstreams/52413db6-a074-4bd2-91ad-3f4cb209389a/download |
| id | ipb_5bb6c8f61ba756b61bed70c31b15658a |
| identifier.url.fl_str_mv | http://hdl.handle.net/10198/17267 |
| instacron_str | ipb |
| institution | Instituto Politécnico de Bragança |
| instname_str | Instituto Politécnico de Bragança |
| language | eng |
| network_acronym_str | ipb |
| network_name_str | Biblioteca Digital do IPB |
| oai_identifier_str | oai:bibliotecadigital.ipb.pt:10198/17267 |
| organization_str_mv | urn:organizationAcronym:ipb |
| person_str_mv | Mouta, K. Azevedo, Lucas D. Fernandes, M.G.A. Fonseca, E.M.M. Fonseca, E.M.M. https://www.ciencia-id.pt/EB17-92E5-8374 EB17-92E5-8374 http://orcid.org/0000-0003-1854-6514 0000-0003-1854-6514 |
| publishDate | 2017 |
| reponame_str | Biblioteca Digital do IPB |
| repository_id_str | urn:repositoryAcronym:ipb |
| service_str_mv | urn:repositoryAcronym:ipb |
| spelling | engpt_PTUntil few years ago, design of sheet metal forming was based on knowledge through work experience and expensive trial and error process. Nowadays the use of numerical simulations in different phases of the sheet metal forming process are performed using finite element analysis (Ranganath et al, 2012). Different codes are available for finite element analysis in metal forming such as Abaqus, Dynaform, Nike 2D, Ansys, etc. Deep drawing is the metalworking process used for stamping flat sheets into cup-shaped forms, where the metal is subjected to different types of deformations (Dieter, 1961). The aim of this work is conduct numerical simulations to verify the deep drawing process and the shape of the final stamping component of a simple profile of a sheet metal geometry. To evaluate the design of sheet metal forming, a nonlinear dynamic explicit numerical model was developed using two models: a 3D quarter and a 2D axisymmetric finite element model, due the geometry and loading conditions symmetry to reduce the computational time processing. The numerical simulations showed the shape deformation occurring after start the process and provided detailed quantitative information about expected weakness of the resulting piece.application/pdfpt_PTSheet metal forming by numerical simulations: 2D and 3D axisymmetric deformation of a cylindrical pieceMouta, K.Azevedo, Lucas D.Fernandes, M.G.A.PersonalFonseca, E.M.M.DSpacehttp://dspace.org/items/bff18bdf-825b-4b45-9774-4f9d94cbe33eDSpacehttp://dspace.org/items/bff18bdf-825b-4b45-9774-4f9d94cbe33eFonsecaElza M. M.Ciência IDhttps://www.ciencia-id.ptEB17-92E5-8374ORCIDhttp://orcid.org0000-0003-1854-6514Researcher IDhttps://www.researcherid.comD-4604-2011Scopus Author IDhttps://www.scopus.com7102526169HostingInstitutionOrganizationalBiblioteca Digital do IPBe-mailmailto:dspace@ipb.ptdspace@ipb.pt2018-04-24T15:16:11Z20172017-01-01T00:00:00ZHandlehttp://hdl.handle.net/10198/17267http://purl.org/coar/access_right/c_abf2open access210064 bytesother research producthttp://purl.org/coar/resource_type/c_6670conference poster2017http://creativecommons.org/licenses/by/4.0/http://purl.org/coar/access_right/c_abf2application/pdffulltexthttps://bibliotecadigital.ipb.pt/bitstreams/52413db6-a074-4bd2-91ad-3f4cb209389a/download7th International Conference on Mechanics and Materials in DesignAlbufeira |
| spellingShingle | Sheet metal forming by numerical simulations: 2D and 3D axisymmetric deformation of a cylindrical piece Mouta, K. |
| status | SINGLETON |
| title | Sheet metal forming by numerical simulations: 2D and 3D axisymmetric deformation of a cylindrical piece |
| title_full | Sheet metal forming by numerical simulations: 2D and 3D axisymmetric deformation of a cylindrical piece |
| title_fullStr | Sheet metal forming by numerical simulations: 2D and 3D axisymmetric deformation of a cylindrical piece |
| title_full_unstemmed | Sheet metal forming by numerical simulations: 2D and 3D axisymmetric deformation of a cylindrical piece |
| title_short | Sheet metal forming by numerical simulations: 2D and 3D axisymmetric deformation of a cylindrical piece |
| title_sort | Sheet metal forming by numerical simulations: 2D and 3D axisymmetric deformation of a cylindrical piece |
| url | http://hdl.handle.net/10198/17267 |
| visible | 1 |