Publicação
Influence of fired clay brick waste additions on the durability of mortars
| Resumo: | The use of metakaolin is known to help improve properties of Portland cement-based mortars. The presumed similarities between the characteristics of metakaolin and those of a powdered (<45 mu m) fired clay brick clean waste (CBW) led to the investigation of the effect on the durability of mortars of partial replacement (10, 25 and 40 wt.%) of Portland cement by CBW. Properties such as 28 and 90 days-compressive strength, water absorption, apparent porosity, absorption by capillarity, chloride retention, carbonation depth and sulphate resistance were evaluated. The CBW-containing cured mortars showed improved strength and density, as the result of combined physical and pozzolanic pore filling effect of added CBW. However, CBW-free mortar exhibited larger spreading and, being more porous, higher sulphate resistance and ability to absorb chlorides. Optimum performance was found for the 40 wt.% CBW mortar whose compressive strength can be up to 130% higher than that of the CBW-free mortar. (C) 2015 Elsevier Ltd. All rights reserved. |
|---|---|
| Autores principais: | Schackow, A. |
| Outros Autores: | Stringari, D.; Senff, L.; Correia, S. L.; Segadaes, A. M. |
| Assunto: | NATURAL POZZOLANS CONCRETE METAKAOLIN RESISTANCE BEHAVIOR PERFORMANCE CARBONATION KAOLINITE CHLORIDE KINETICS |
| Ano: | 2015 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso restrito |
| Instituição associada: | Universidade de Aveiro |
| Idioma: | inglês |
| Origem: | RIA - Repositório Institucional da Universidade de Aveiro |
Registos relacionados
groups Resistance to salts of lime and pozzolan mortars
por: Faria, Paulina
Publicado em: (2009)
por: Faria, Paulina
Publicado em: (2009)
groups The influence of brick residues in the behaviour of lime mortars
por: Matias, Gina
Publicado em: (2008)
por: Matias, Gina
Publicado em: (2008)
article Influence of blowing agent on the fresh- and hardened-state properties of lightweight geopolymers
por: Novais, Rui M.
Publicado em: (2016)
por: Novais, Rui M.
Publicado em: (2016)
article Development of grouts for consolidation of old renders
por: Azeiteiro, L. C.
Publicado em: (2014)
por: Azeiteiro, L. C.
Publicado em: (2014)
article Effect of pozzolans with different physical and chemical characteristics on concrete properties
por: Paiva, H.
Publicado em: (2016)
por: Paiva, H.
Publicado em: (2016)
article Monitoring hydration in lime-metakaolin composites using electrochemical impedance spectroscopy and nuclear magnetic resonance spectroscopy
por: Pesce, G. L.
Publicado em: (2014)
por: Pesce, G. L.
Publicado em: (2014)
article Chloride-induced corrosion on reinforcing steel: from the fundamentals to the monitoring techniques
por: Montemor, M. F.
Publicado em: (2003)
por: Montemor, M. F.
Publicado em: (2003)
article Influence of GFRP Confinement of Reinforced Concrete Columns on the Corrosion of Reinforcing Steel in a Salt Water Environment
por: Sena da Fonseca, B.
Publicado em: (2015)
por: Sena da Fonseca, B.
Publicado em: (2015)
article Biotech cementitious materials: Some aspects of an innovative approach for concrete with enhanced durability
por: Pacheco-Torgal, F.
Publicado em: (2013)
por: Pacheco-Torgal, F.
Publicado em: (2013)
article Technical replicas of Portuguese ceramic tile bodies produced in the Oporto region in the late nineteenth to early twentieth centuries
por: Costa, Marisa
Publicado em: (2016)
por: Costa, Marisa
Publicado em: (2016)
article Post-earthquake fire assessment of reinforced concrete frame structures
por: Vitorino, Hugo
Publicado em: (2022)
por: Vitorino, Hugo
Publicado em: (2022)
groups Influence of the concentration of enzyme, phosphate ions and calcium chloride on the heat-resistance of horseradish peroxidase
por: Lemos, M. A.
Publicado em: (1997)
por: Lemos, M. A.
Publicado em: (1997)
article Development of porogene-containing mortars for levelling the indoor ambient moisture
por: Goncalves, H.
Publicado em: (2014)
por: Goncalves, H.
Publicado em: (2014)
article Parametric analysis of post-earthquake fire resistance of reinforced concrete frames without seismic design
por: Vitorino, Hugo
Publicado em: (2024)
por: Vitorino, Hugo
Publicado em: (2024)
school Electrochemical sensors for chloride and pH monitoring in reinforced concrete structures
por: Sampaio, Rui Miguel da Silva
Publicado em: (2021)
por: Sampaio, Rui Miguel da Silva
Publicado em: (2021)
article Non-destructive characterization of ancient clay brick walls by indirect ultrasonic measurements
por: Mesquita, Esequiel
Publicado em: (2018)
por: Mesquita, Esequiel
Publicado em: (2018)
article The influence of TiO2 nanoparticles and poliacrilonitrile fibers on the rheological behavior and hardened properties of mortars
por: Senff, L.
Publicado em: (2015)
por: Senff, L.
Publicado em: (2015)
article Gypsum Mortars with Acacia dealbata Biomass Waste Additions
por: Ranesi, Alessandra
Publicado em: (2022)
por: Ranesi, Alessandra
Publicado em: (2022)
article Waste glass from end-of-life fluorescent lamps as raw material in geopolymers
por: Novais, Rui M.
Publicado em: (2016)
por: Novais, Rui M.
Publicado em: (2016)
school Post-earthquake fire numerical analyses on reinforced concrete structures
por: Vitorino, Hugo Manuel Mendes
Publicado em: (2024)
por: Vitorino, Hugo Manuel Mendes
Publicado em: (2024)
article Incorporation of titanium dioxide nanoparticles in mortars - Influence of microstructure in the hardened state properties and photocatalytic activity
por: Lucas, S. S.
Publicado em: (2013)
por: Lucas, S. S.
Publicado em: (2013)
school Strengthening of flat slabs with reinforced concrete overlay – Analysis and development of the solution
por: Fernandes, Hugo Daniel Pereira
Publicado em: (2019)
por: Fernandes, Hugo Daniel Pereira
Publicado em: (2019)
article Influence of ibuprofen addition on the properties of a bioactive bone cement
por: Lopes, P. P.
Publicado em: (2013)
por: Lopes, P. P.
Publicado em: (2013)
article Degradation behavior of PEO coating on AM50 magnesium alloy produced from electrolytes with clay particle addition
por: Lu, Xiaopeng
Publicado em: (2015)
por: Lu, Xiaopeng
Publicado em: (2015)
article Thermogravimetric analysis of the co-pyrolysis of a bituminous coal and pulp mill sludge
por: Coimbra, R. N.
Publicado em: (2015)
por: Coimbra, R. N.
Publicado em: (2015)
article Mortar formulations with bottom ash from biomass combustion
por: Modolo, R. C. E.
Publicado em: (2013)
por: Modolo, R. C. E.
Publicado em: (2013)
groups Evaluation of durability and resistance of steel anchorages in masonry walls
por: Pinho, Fernando Farinha da Silva
Publicado em: (2014)
por: Pinho, Fernando Farinha da Silva
Publicado em: (2014)
article Formulation of mortars with nano-SiO2 and nano-TiO2 for degradation of pollutants in buildings
por: Senff, L.
Publicado em: (2013)
por: Senff, L.
Publicado em: (2013)
article The effect of natural zeolite on microstructure, mechanical and heavy metals adsorption properties of metakaolin based geopolymers
por: Andrejkovicova, S.
Publicado em: (2016)
por: Andrejkovicova, S.
Publicado em: (2016)
article Development of eco-mortars with the incorporation of municipal solid wastes incineration ash
por: Vilarinho, Inês S.
Publicado em: (2023)
por: Vilarinho, Inês S.
Publicado em: (2023)
article Novel porous fly ash-containing geopolymers for pH buffering applications
por: Novais, Rui M.
Publicado em: (2016)
por: Novais, Rui M.
Publicado em: (2016)
article Novel porous fly-ash containing geopolymer monoliths for lead adsorption from wastewaters
por: Novais, Rui M.
Publicado em: (2016)
por: Novais, Rui M.
Publicado em: (2016)
article Consolidation and chromatic reintegration of historical renders with lime-based pozzolanic products
por: Pascoal, Patrícia
Publicado em: (2015)
por: Pascoal, Patrícia
Publicado em: (2015)
article Selective potassium chloride recognition, sensing, extraction, and transport using a chalcogen-bonding heteroditopic receptor
por: Docker, Andrew
Publicado em: (2022)
por: Docker, Andrew
Publicado em: (2022)
article New insights on the effects of ionic liquid structural changes at the gene expression level: Molecular mechanisms of toxicity in Daphnia magna
por: Jeremias, Guilherme
Publicado em: (2020)
por: Jeremias, Guilherme
Publicado em: (2020)
article Estrategias para la inspección óptima de estructuras de hormigón armado sujetas a corrosión
por: Benítez Mongelós, Pablo Daniel
Publicado em: (2021)
por: Benítez Mongelós, Pablo Daniel
Publicado em: (2021)
article Co-firing of coal and manure biomass: a TG-MS approach
por: Otero, M.
Publicado em: (2011)
por: Otero, M.
Publicado em: (2011)
article The influence of porogene additives on the properties of mortars used to control the ambient moisture
por: Goncalves, H.
Publicado em: (2014)
por: Goncalves, H.
Publicado em: (2014)
article Influence of red mud addition on rheological behavior and hardened properties of mortars
por: Senff, L.
Publicado em: (2014)
por: Senff, L.
Publicado em: (2014)
article Crystallization kinetics of PCL and PCL–glass composites for additive manufacturing
por: Pires, Liliana Sofia Oliveira
Publicado em: (2018)
por: Pires, Liliana Sofia Oliveira
Publicado em: (2018)
Registos relacionados
-
groups Resistance to salts of lime and pozzolan mortars
por: Faria, Paulina
Publicado em: (2009) -
groups The influence of brick residues in the behaviour of lime mortars
por: Matias, Gina
Publicado em: (2008) -
article Influence of blowing agent on the fresh- and hardened-state properties of lightweight geopolymers
por: Novais, Rui M.
Publicado em: (2016) -
article Development of grouts for consolidation of old renders
por: Azeiteiro, L. C.
Publicado em: (2014) -
article Effect of pozzolans with different physical and chemical characteristics on concrete properties
por: Paiva, H.
Publicado em: (2016)