Publicação
Non-isothermal crystallization kinetics of poly(propylene)-based graphene nanocomposites for injection moulding
| Resumo: | This work reports the preparation and the studies on the non-isothermal crystallization kinetics of poly(propylene) (PP)-based graphene nanoplatelets (GnPs) nanocomposites. The PP-based GnPs nanocomposites were prepared by melt blending technique. The structural characterization of these nanocomposites was performed through Raman spectroscopy and X-ray diffraction (XRD) measurements. The non-isothermal experiments were performed using a differential scanning calorimeter (DSC). The effect of GnPs and compatibilizer presence on the PP non-isothermal crystallization behaviour was analysed. Maleic anhydride (MA) was selected as a compatibilizer agent. A shift in the G band of the Raman spectra was observed for all nanocomposites. The XRD measurements suggest the formation of β-PP crystals in GnPs free sample. The DSC analysis showed a reduction of nanocomposites melt temperature (Tm) compared to neat PP. Based on the cooling curves, that showed an increase in the crystallization temperature (Tc) of the nanocomposites compared to neat PP, it is suggested that GnPs actas a nucleating agent. A slight increase in the degree of crystallinity (Xc) of the nanocomposites was also observed. The non-isothermal crystallization kinetics were evaluated through Ozawa, Liu, Kissinger, Tahkor, and Augis–Bennett methods. Overall, these results indicated that the type of nucleation, growth, and morphology of PP crystals change in the presence of GnPs and compatibilizer, which is also confirmed by optical microscopy analysis. |
|---|---|
| Autores principais: | Melo de Lima, Luiza R. |
| Outros Autores: | Trindade, Tito; Oliveira, José Martinho |
| Assunto: | PP-based nanocomposites Graphene nanoplatelets Compatibilization Non-isothermal crystallization kinetics Injection moulding |
| Ano: | 2022 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso restrito |
| Instituição associada: | Universidade de Aveiro |
| Idioma: | inglês |
| Origem: | RIA - Repositório Institucional da Universidade de Aveiro |
Registos relacionados
article Rheological behavior of poly(propylene) reinforced with graphene nanoplatelets for injection molding
por: Melo de Lima, Luiza R.
Publicado em: (2022)
por: Melo de Lima, Luiza R.
Publicado em: (2022)
article Non-isothermal crystallization kinetics of cork-polymer composites for injection molding
por: Magalhães da Silva, Sara P.
Publicado em: (2016)
por: Magalhães da Silva, Sara P.
Publicado em: (2016)
article The non-isothermal crystallization kinetics of polypropylene after DSC calibration on cooling
por: Martins, J. A.
Publicado em: (2000)
por: Martins, J. A.
Publicado em: (2000)
article Evaluation of the sample temperature increase during the quiescent and shear-induced isothermal crystallization of polyethylene
por: Martins, J. A.
Publicado em: (2003)
por: Martins, J. A.
Publicado em: (2003)
article Predicting shrinkage in semi-crystalline injection mouldings - the influence of pressure
por: Pontes, A. J.
Publicado em: (2006)
por: Pontes, A. J.
Publicado em: (2006)
article Graphene‐polymer nanocomposites for biomedical applications
por: Silva, Magda
Publicado em: (2018)
por: Silva, Magda
Publicado em: (2018)
groups CFRP laminates enhanced with graphene nanoparticles in multifunctional applications
por: Parente, J.M.
Publicado em: (2023)
por: Parente, J.M.
Publicado em: (2023)
article Electrically conductive polyetheretherketone nanocomposite filaments: from production to fused deposition modeling
por: Gonçalves, Jordana Catarina Carvalho
Publicado em: (2018)
por: Gonçalves, Jordana Catarina Carvalho
Publicado em: (2018)
article Influence of ferrite nanoparticle type and content on the crystallization kinetics and electroactive phase nucleation of poly(vinilidene fluoride)
por: Sencadas, Vítor João Gomes Silva
Publicado em: (2011)
por: Sencadas, Vítor João Gomes Silva
Publicado em: (2011)
article Nanoclays dispersion in a PA6/PP blend by twin screw compounding
por: Covas, J. A.
Publicado em: (2011)
por: Covas, J. A.
Publicado em: (2011)
book Using TEM and SEM to unveil the role of nanoclays in polymer blends
por: Almeida, Maria de Fátima
Publicado em: (2010)
por: Almeida, Maria de Fátima
Publicado em: (2010)
article Kinetics of quality changes of pumpkin (Curcurbita maxima L.) stored under isothermal and non-isothermal frozen conditions
por: Gonçalves, E.M.
Publicado em: (2011)
por: Gonçalves, E.M.
Publicado em: (2011)
article Taking advantage of the functional synergism between carbon nanotubes and graphene nanoplatelets to obtain polypropylene-based nanocomposites with enhanced oxidative resistance
por: Infurna, Giulia
Publicado em: (2020)
por: Infurna, Giulia
Publicado em: (2020)
article Non-isothermal crystallisation kinetics with instantaneous nucleation
por: Martins, J. A.
Publicado em: (2000)
por: Martins, J. A.
Publicado em: (2000)
article Development of piezoresistive sensors based on graphene nanoplatelets screen-printed on woven and knitted fabrics: optimisation of active layer formulation and transversal/longitudinal textile direction
por: Arruda, Luisa Mendes
Publicado em: (2022)
por: Arruda, Luisa Mendes
Publicado em: (2022)
article Instrumentation and In-mould data acquisition system for injection moulding process
por: Bernardo, Rodrigo M. C.
Publicado em: (2023)
por: Bernardo, Rodrigo M. C.
Publicado em: (2023)
book Instrumentation and In-mould Data Acquisition System for Injection Moulding Process
por: Bernardo, Rodrigo M. C.
Publicado em: (2023)
por: Bernardo, Rodrigo M. C.
Publicado em: (2023)
article 3D printing of graphene-based polymeric nanocomposites for biomedical applications
por: Silva, Magda
Publicado em: (2021)
por: Silva, Magda
Publicado em: (2021)
article Study of ejection forces in injection moulding of thin-walled tubular mouldings
por: Martins, Luis C.
Publicado em: (2014)
por: Martins, Luis C.
Publicado em: (2014)
article Dynamic response of soft core sandwich beams with metal-graphene nanocomposite skins
por: Loja, Amélia
Publicado em: (2017)
por: Loja, Amélia
Publicado em: (2017)
article Influence of matrix recrystallization and nanofiller porosity on the interfacial properties of holey graphene-aluminium nanocomposites
por: Guarda, Cátia
Publicado em: (2023)
por: Guarda, Cátia
Publicado em: (2023)
article Effect of melt viscosity on the ejection force in injection moulds
por: Pontes, A. J.
Publicado em: (2004)
por: Pontes, A. J.
Publicado em: (2004)
article Surface modification of graphene nanosheets with gold nanoparticles: the role of oxygen moieties at graphene surface on gold nucleation and growth
por: Gonçalves, Gil
Publicado em: (2009)
por: Gonçalves, Gil
Publicado em: (2009)
article Graphene oxide modified with PMMA via ATRP as a reinforcement filler
por: Gonçalves, Gil
Publicado em: (2010)
por: Gonçalves, Gil
Publicado em: (2010)
article On the Use of the Gompertz Model to Predict Microbial Thermal Inactivation Under Isothermal and Non-Isothermal Conditions
por: Gil, Maria M.
Publicado em: (2011)
por: Gil, Maria M.
Publicado em: (2011)
article On the use of the gompertz model to predict microbial thermal inactivation under isothermal and non-isothermal conditions
por: Gil, Maria M.
Publicado em: (2011)
por: Gil, Maria M.
Publicado em: (2011)
article Hybrid structures made of polyurethane/graphene nanocomposite foams embedded within aluminum opencell foam
por: Pinto, Susana C.
Publicado em: (2020)
por: Pinto, Susana C.
Publicado em: (2020)
article Crystallization processes in bicomponent thin film depositions: towards a realistic kinetic Monte Carlo simulation
por: Martinez-Martinez, D.
Publicado em: (2018)
por: Martinez-Martinez, D.
Publicado em: (2018)
article Consolidation of glass fiber-polypropylene towpregs by compression moulding
por: Silva, J. F.
Publicado em: (2006)
por: Silva, J. F.
Publicado em: (2006)
article Comparative investigation of friction stir welds reinforced with graphene nanoplatelets and copper in AA6082-T6 alloy
por: Biradar, Rahul
Publicado em: (2024)
por: Biradar, Rahul
Publicado em: (2024)
article Rediscovering structural foams in injection moulding
por: Pouzada, A. S.
Publicado em: (2013)
por: Pouzada, A. S.
Publicado em: (2013)
article Microstructure of PP/clay nanocomposites produced by shear induced injection moulding
por: Costantino, Alejandra
Publicado em: (2012)
por: Costantino, Alejandra
Publicado em: (2012)
article Polypropylene/clay nanocomposites produced by shear controlled orientation in injection moulding : deformation and fracture properties
por: Costantino, Alejandra
Publicado em: (2013)
por: Costantino, Alejandra
Publicado em: (2013)
article Assessment of injection moulded parts of PP/nanoclay produced with hybrid moulds
por: Neves, A. F.
Publicado em: (2011)
por: Neves, A. F.
Publicado em: (2011)
article Assessment of injection moulded parts of PP/nanoclay produced with hybrid moulds
por: Neves, A. F.
Publicado em: (2013)
por: Neves, A. F.
Publicado em: (2013)
article Modeling of plasticating injection moulding – experimental assessment
por: Fernandes, Célio Bruno Pinto
Publicado em: (2014)
por: Fernandes, Célio Bruno Pinto
Publicado em: (2014)
article The drying of kiwi: modelling of drying kinetics and desorption isotherms
por: Barroca, Maria João
Publicado em: (2021)
por: Barroca, Maria João
Publicado em: (2021)
school Liquid-phase exfoliation of highly oriented pyrolytic graphite and its oxidation by air-ozone atomization
por: Bernardes, Adriana Filipe
Publicado em: (2018)
por: Bernardes, Adriana Filipe
Publicado em: (2018)
article Methionine-functionalized graphene oxide/sodium alginate bio-polymer nanocomposite hydrogel beads
por: Yadav, Sushma
Publicado em: (2021)
por: Yadav, Sushma
Publicado em: (2021)
article Graphene-based polaritonic crystal
por: Bludov, Yuliy V.
Publicado em: (2012)
por: Bludov, Yuliy V.
Publicado em: (2012)
Registos relacionados
-
article Rheological behavior of poly(propylene) reinforced with graphene nanoplatelets for injection molding
por: Melo de Lima, Luiza R.
Publicado em: (2022) -
article Non-isothermal crystallization kinetics of cork-polymer composites for injection molding
por: Magalhães da Silva, Sara P.
Publicado em: (2016) -
article The non-isothermal crystallization kinetics of polypropylene after DSC calibration on cooling
por: Martins, J. A.
Publicado em: (2000) -
article Evaluation of the sample temperature increase during the quiescent and shear-induced isothermal crystallization of polyethylene
por: Martins, J. A.
Publicado em: (2003) -
article Predicting shrinkage in semi-crystalline injection mouldings - the influence of pressure
por: Pontes, A. J.
Publicado em: (2006)