Publicação
Thermal diffusivity measurements of vapour grown carbon fibre composites, using the optical beam deflection technique
| Resumo: | Carbon fibres are used widely as reinforcements for polymeric matrices in high-tech applications by virtue of their good mechanical, electrical and thermal properties. Vapour grown carbon fibres (VGCF) are a new type of fibres whose technological applications, namely reinforcements for thermoplastic matrix composites, are yet to be developed. Due to their potentially low cost and high production rates, VGCFs show promising new possibilities in this area. Recently, in industry worldwide, the potential of VGCFs in thermal and electrical applications such as solid-state batteries and electrostatic painting of high volume automotive plastic parts is increasingly being recognised. As a result, easy and non-destructive measurement of thermal and electrical properties of VGCF-based composites has become an important issue for use in industrial applications. In this study the optical beam deflection technique was used for the evaluation of the thermal diffusivity of vapour grown carbon fibres (VGCF) - polymer composites. It is shown that, for low diffusivities, simple approaches such as the “phase method'' or the ``zero crossing method'' are not valid and a multiparameter fitting to the amplitude values has to be used instead. The thermal diffusivity of the composites, measured along the direction of the fibre preferential orientation, increases with fibre content. This increase is not very marked, possibly due to poor adhesion between fibre and matrix. |
|---|---|
| Autores principais: | Macedo, F. J. |
| Outros Autores: | Ferreira, J. A.; Hattum, F. W. J. van; Bernardo, C. A. |
| Assunto: | Photothermal Thermal diffusivity Beam deflection Vapour grown carbon fibres Composites |
| Ano: | 1999 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso restrito |
| Instituição associada: | Universidade do Minho |
| Idioma: | inglês |
| Origem: | RepositóriUM - Universidade do Minho |
Registos relacionados
article A promising conductive material: highly oriented polypropylene filled with short vapour-grown carbon fibres
por: Gordeyev, S. A.
Publicado em: (2001)
por: Gordeyev, S. A.
Publicado em: (2001)
article Transport properties of polymer-vapour grown carbon fibre composites
por: Gordeyev, S. A.
Publicado em: (2000)
por: Gordeyev, S. A.
Publicado em: (2000)
category The effect of morphology on the properties of vapour-grown carbon fibres
por: Hattum, F. W. J. van
Publicado em: (1997)
por: Hattum, F. W. J. van
Publicado em: (1997)
article Morphological, Mechanical and Interfacial Analysis of Vapour-Grown Carbon Fibres
por: Hattum, F. W. J. van
Publicado em: (1997)
por: Hattum, F. W. J. van
Publicado em: (1997)
article Production and Assessment of Polycarbonate Composites Reinforced with Vapour-Grown Carbon Fibres
por: Carneiro, O. S.
Publicado em: (1998)
por: Carneiro, O. S.
Publicado em: (1998)
article Deflection and cracking behavior of SFRSCC beams reinforced with hybrid prestressed GFRP and steel reinforcements
por: Mazaheripour, Hadi
Publicado em: (2016)
por: Mazaheripour, Hadi
Publicado em: (2016)
article The adjustment of pavement deflections due to temperature variations
por: Pais, Jorge C.
Publicado em: (2020)
por: Pais, Jorge C.
Publicado em: (2020)
groups Optimal location of supports in beam structures using genetic algorithms
por: Loureiro, Diógenes
Publicado em: (2014)
por: Loureiro, Diógenes
Publicado em: (2014)
article A multi-nodal ring finite element for analysis of pipe deflection
por: Fonseca, E.M.M.
Publicado em: (2011)
por: Fonseca, E.M.M.
Publicado em: (2011)
article Flexural strengthening of concrete beams with CFRP laminates bonded into slits
por: Barros, Joaquim A. O.
Publicado em: (2005)
por: Barros, Joaquim A. O.
Publicado em: (2005)
article Finite element analysis of steel beams with web apertures under fire condiction
por: Kada, Abdelhak
Publicado em: (2016)
por: Kada, Abdelhak
Publicado em: (2016)
article Investigation of the microstructure, chemical composition and lateral gorwth of TiN films deposited by laser-induced chemical vapour deposition
por: Silvestre, António Jorge
Publicado em: (1994)
por: Silvestre, António Jorge
Publicado em: (1994)
article Deformation analysis of fibre-reinforced polymer reinforced concrete beams by tension-stiffening approach
por: Ng, P. L.
Publicado em: (2020)
por: Ng, P. L.
Publicado em: (2020)
article Thermal conductivity and thermal diffusivity of cores from a 26 meter deep borehole drilled in Livingston Island, Maritime Antarctic
por: Correia, A.
Publicado em: (2012)
por: Correia, A.
Publicado em: (2012)
article Very low surface tension liquid–vapour interfaces of patchy colloids
por: Teixeira, Paulo
Publicado em: (2017)
por: Teixeira, Paulo
Publicado em: (2017)
article An integrated approach for predicting the shear capacity of fibre reinforced concrete beams
por: Barros, Joaquim A. O.
Publicado em: (2018)
por: Barros, Joaquim A. O.
Publicado em: (2018)
article Aerosol assisted chemical vapour deposition of hydroxyapatite-embedded titanium dioxide composite thin films
por: Piccirillo, C.
Publicado em: (2017)
por: Piccirillo, C.
Publicado em: (2017)
category A study of the effect of plasma treatment on the interfacial properties of carbon fibre–thermoplastic composites
por: Montes-Morán, M. A.
Publicado em: (2005)
por: Montes-Morán, M. A.
Publicado em: (2005)
article A design model for fibre reinforced concrete bending elements with longitudinal pre-stressed steel and FRP bars
por: Taheri, Mahsa
Publicado em: (2012)
por: Taheri, Mahsa
Publicado em: (2012)
article High lignin content polymer filaments as carbon fibre precursors
por: Ribeiro, Rui
Publicado em: (2025)
por: Ribeiro, Rui
Publicado em: (2025)
article Shear behaviour of steel fibre reinforced self-consolidating concrete beams based on the modified compression field theory
por: Ding, Yining
Publicado em: (2012)
por: Ding, Yining
Publicado em: (2012)
rate_review Predicting lab-grown diamond prices: A comparative view
por: Cardoso, M. G. M. S.
Publicado em: (2026)
por: Cardoso, M. G. M. S.
Publicado em: (2026)
article New developments on fibre optic colorimetrie sensors for dissolved CO2 in aquatic environments
por: Pereira, Carlos
Publicado em: (2017)
por: Pereira, Carlos
Publicado em: (2017)
article Sustainable monitoring of concrete structures: strength and durability performance of polymer-modified self-sensing concrete
por: Pacheco-Torgal, F.
Publicado em: (2012)
por: Pacheco-Torgal, F.
Publicado em: (2012)
school Lab grown diamonds on the luxury market : how can they gain a competitive advantage?
por: Welp, Lisa
Publicado em: (2022)
por: Welp, Lisa
Publicado em: (2022)
article Ribbon fibres from naphtalene-based mesophase: Surface studies and fibre/matrix interactions in polycarbonate composites
por: Paiva, M. C.
Publicado em: (1998)
por: Paiva, M. C.
Publicado em: (1998)
article A model for the simultaneous prediction of the flexural and shear deflections of statically determinate and indeterminate RC structures
por: Ramezansefat, Honeyeh
Publicado em: (2017)
por: Ramezansefat, Honeyeh
Publicado em: (2017)
groups Carbon nanofibers from plastic solid waste
por: Lopes, Jéssica Paula Marim
Publicado em: (2020)
por: Lopes, Jéssica Paula Marim
Publicado em: (2020)
article Simple methodology for methylmercury and inorganic mercury determinations by high-performance liquid chromatography-cold vapour atomic fluorescence spectrometry
por: Ramalhosa, Elsa
Publicado em: (2001)
por: Ramalhosa, Elsa
Publicado em: (2001)
article Textile sensor applications with composite monofilaments of polymer / carbon nanotubes
por: Ferreira, Alexandre
Publicado em: (2013)
por: Ferreira, Alexandre
Publicado em: (2013)
article Engineered living bioassemblies for biomedical and functional material applications
por: Guimarães, C. F.
Publicado em: (2022)
por: Guimarães, C. F.
Publicado em: (2022)
article Integrated compounding and injection moulding of short fibre reinforced composites
por: Sousa, R. A.
Publicado em: (2004)
por: Sousa, R. A.
Publicado em: (2004)
article Grapevine varieties exhibiting differences in stomatal response to water deficit
por: Costa, Joaquim M.
Publicado em: (2012)
por: Costa, Joaquim M.
Publicado em: (2012)
article Substituting conventional steel alloys by carbon fibre composites in structural parts of an existing laser cutting equipment
por: Vieira, D. G.
Publicado em: (2011)
por: Vieira, D. G.
Publicado em: (2011)
article Enzymatic modification of paper fibres
por: Pala, H.
Publicado em: (2002)
por: Pala, H.
Publicado em: (2002)
school A study of the mechanical properties of vapour grown carbon fibres and carbon fibre-thermoplastic composites
por: Hattum, F. W. J. van
Publicado em: (1999)
por: Hattum, F. W. J. van
Publicado em: (1999)
book Thermal performance of steel and fibre reinforced concrete composite floor
por: Silva, Talita Lima
Publicado em: (2021)
por: Silva, Talita Lima
Publicado em: (2021)
article Improving the dynamical behaviour of a laser cutting equipment by using a carbon fibre composite main structural runway frame
por: Vieira, D. G.
Publicado em: (2013)
por: Vieira, D. G.
Publicado em: (2013)
category Improving the dynamical behaviour of a laser cutting equipment by using a carbon fibre composite main structural runway frame
por: Vieira, D. G.
Publicado em: (2011)
por: Vieira, D. G.
Publicado em: (2011)
article Mechanical properties of fly ash alkaline-based mortars containing recycled aggregates and reinforced by hemp fibres summited to accelerated carbonation
por: Mastali, Mohammad
Publicado em: (2019)
por: Mastali, Mohammad
Publicado em: (2019)
Registos relacionados
-
article A promising conductive material: highly oriented polypropylene filled with short vapour-grown carbon fibres
por: Gordeyev, S. A.
Publicado em: (2001) -
article Transport properties of polymer-vapour grown carbon fibre composites
por: Gordeyev, S. A.
Publicado em: (2000) -
category The effect of morphology on the properties of vapour-grown carbon fibres
por: Hattum, F. W. J. van
Publicado em: (1997) -
article Morphological, Mechanical and Interfacial Analysis of Vapour-Grown Carbon Fibres
por: Hattum, F. W. J. van
Publicado em: (1997) -
article Production and Assessment of Polycarbonate Composites Reinforced with Vapour-Grown Carbon Fibres
por: Carneiro, O. S.
Publicado em: (1998)