Publicação
Evaluation of the role of carbon nanotubes on the electrical properties of poly(butylene-terephthalate) nanocomposites for industrial applications
| Resumo: | In this article, innovative electrically conductive polymer nanocomposites based on poly(butylene terephthalate) (PBT) filled with carbon nanotubes (CNTs) at different concentrations, to be used in the automotive field, have been investigated. Field emission scanning electron microscopy (FESEM) analysis revealed how a good nanofiller dispersion was obtained, especially by using surface treated nanotubes and by processing these materials using a more restrictive screw configuration. Melt flow index measurements highlighted that the processability of these nanocomposites was reduced at elevated filler amounts, even if CNT surface treatment promoted a partial retention of the fluidity of the neat PBT. Thermal degradation stability was improved upon the addition of CNT, even at limited filler amounts. Differential scanning calorimetry measurements evidenced how the presence of CNT slightly increased both the crystallization temperature and the crystalline fraction of the materials. The additivation of CNTs promoted a stiffening effect at elevated CNT contents, associated to an evident embrittlement of the samples. Electrical resistivity measurements showed that the most interesting results (i.e. 2.6 101 Ocm) were obtained for nanocomposites with a total filler content of 3 wt%, processed using the more restrictive screw configuration. For these materials, it was possible to obtain a rapid surface heating through Joule effect at applied voltages of 12 V. |
|---|---|
| Autores principais: | Dorigato, A. |
| Outros Autores: | Freitas, V.; Covas, J. A.; Paiva, M. C.; Brugnara, M.; Pegoretti, A. |
| Assunto: | Nanocomposites Carbon nanotubes Functionalization Conducting polymers Mechanical properties |
| Ano: | 2019 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | Universidade do Minho |
| Idioma: | inglês |
| Origem: | RepositóriUM - Universidade do Minho |
Registos relacionados
article Physical and mechanical characterization of nanocomposites with carbon nanotubes functionalized with the matrix polymer
por: Paiva, M. C.
Publicado em: (2012)
por: Paiva, M. C.
Publicado em: (2012)
article Tuning electrical and thermoelectric properties of freestanding graphene oxide papers by carbon nanotubes and heat treatment
por: Okhay, O.
Publicado em: (2019)
por: Okhay, O.
Publicado em: (2019)
article Carbon nanotube-polyurethane composite sheets for flexible thermoelectric materials
por: Paleo, Antonio J.
Publicado em: (2023)
por: Paleo, Antonio J.
Publicado em: (2023)
article Mechanical and morphological characterization of polymer–carbon nanocomposites from functionalized carbon nanotubes
por: Paiva, M. C.
Publicado em: (2004)
por: Paiva, M. C.
Publicado em: (2004)
article High-performance PEEK/MWCNT nanocomposites: Combining enhanced electrical conductivity and nanotube dispersion
por: Silva, Sofia
Publicado em: (2024)
por: Silva, Sofia
Publicado em: (2024)
article Development of electrically conductive polymer nanocomposites for the automotive cable industry
por: Guerreiro, Miguel
Publicado em: (2021)
por: Guerreiro, Miguel
Publicado em: (2021)
article Shape-memory polymers based on carbon nanotube composites
por: Silva, Mariana Martins da
Publicado em: (2024)
por: Silva, Mariana Martins da
Publicado em: (2024)
category Electrical and thermal properties of polyurethane/carbon nanotubes composites
por: Vilas Boas, H. M.
Publicado em: (2011)
por: Vilas Boas, H. M.
Publicado em: (2011)
article Polyethylene/ poly(3-hydroxybutyrate-co-3-hydroxyvalerate /carbon nanotube composites for eco-friendly electronic applications
por: Fernández Armada, David
Publicado em: (2022)
por: Fernández Armada, David
Publicado em: (2022)
article Dispersion and re-agglomeration phenomena during melt mixing of polypropylene with multi-wall carbon nanotubes
por: Jamali, S.
Publicado em: (2013)
por: Jamali, S.
Publicado em: (2013)
article Poly(vinylidene fluoride) composites with carbon nanotubes decorated with metal nanoparticles
por: Nunes-Pereira, J.
Publicado em: (2018)
por: Nunes-Pereira, J.
Publicado em: (2018)
category Monofilament composites of Co-continuous Polyamide12/Poly (Methyl Methacrylate) and carbon nanotubes
por: Covas, J. A.
Publicado em: (2014)
por: Covas, J. A.
Publicado em: (2014)
article Micro-structure and mechanical properties of carbon nanotube/cement nanocompositesl
por: Parveen, Shama
Publicado em: (2013)
por: Parveen, Shama
Publicado em: (2013)
category Composites with polymer-grafted carbon nanotubes
por: Paiva, M. C.
Publicado em: (2014)
por: Paiva, M. C.
Publicado em: (2014)
article Boosting through-plane electrical conductivity: chitosan composite films with carbon-sepiolite and multiwalled carbon nanotubes
por: Barra, Ana
Publicado em: (2025)
por: Barra, Ana
Publicado em: (2025)
article Liquid sensing properties of melt processed polypropylene/poly(ε-caprolactone) blends containing multiwalled carbon nanotubes
por: Potschke, Peter
Publicado em: (2011)
por: Potschke, Peter
Publicado em: (2011)
article Effect of thermomechanical history on final properties of carbon nanotube-polymer composites
por: Jamali, S.
Publicado em: (2011)
por: Jamali, S.
Publicado em: (2011)
book Modeling carbon nanotube electrical properties in CNT/polymer composites
por: Silva, Jaime
Publicado em: (2012)
por: Silva, Jaime
Publicado em: (2012)
article Physical and mechanical characterization of functionalized with the matrix polymer
por: Paiva, M. C.
Publicado em: (2005)
por: Paiva, M. C.
Publicado em: (2005)
article The effect of nanotube surface oxidation in the electrical response of MWCNT/PVDF nanocomposites
por: Lanceros-Méndez, S.
Publicado em: (2012)
por: Lanceros-Méndez, S.
Publicado em: (2012)
article Mechanical properties of phenine nanotubes
por: Faria, Bruno Miguel Silva
Publicado em: (2022)
por: Faria, Bruno Miguel Silva
Publicado em: (2022)
category Aligned carbon nanotubes composites for flexible pressure sensors
por: Sepúlveda, A. T.
Publicado em: (2011)
por: Sepúlveda, A. T.
Publicado em: (2011)
article Processing and performance of carbon/epoxy multi-scale composites containing carbon nanofibres and single walled carbon nanotubes
por: Rana, S.
Publicado em: (2013)
por: Rana, S.
Publicado em: (2013)
article The influence of matrix mediated hopping conductivity, filler concentration, aspect ratio and orientation on the electrical response of carbon nanotube/polymer nanocomposites
por: Silva, J.
Publicado em: (2011)
por: Silva, J.
Publicado em: (2011)
article Electromechanical performance of poly(vinylidene fluoride)/carbon nanotube composites for strain sensor applications
por: Ferreira, A.
Publicado em: (2012)
por: Ferreira, A.
Publicado em: (2012)
article A complex network based simulation approach to predict the electrical properties of nanocomposites
por: Simões, Ricardo
Publicado em: (2010)
por: Simões, Ricardo
Publicado em: (2010)
category Dispersion of carbon nanotubes in poly(lactic acid)
por: Novais, R. M.
Publicado em: (2011)
por: Novais, R. M.
Publicado em: (2011)
article Effect of modification of nonwoven textiles with biochar and multi-walled carbon nanotubes on their dielectric properties
por: Kovalchuk, O. V.
Publicado em: (2024)
por: Kovalchuk, O. V.
Publicado em: (2024)
article Comparative studies on the processing and performance of carbon nanotube and nanofibre based multi-scale composites
por: Rana, S.
Publicado em: (2014)
por: Rana, S.
Publicado em: (2014)
article Nanocomposite flexible pressure sensor for biomedical applications
por: Sepúlveda, A. T.
Publicado em: (2011)
por: Sepúlveda, A. T.
Publicado em: (2011)
article Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique
por: Parveen, Shama
Publicado em: (2015)
por: Parveen, Shama
Publicado em: (2015)
category Dispersion of carbon nanotubes in poly(lactic acid)
por: Covas, J. A.
Publicado em: (2012)
por: Covas, J. A.
Publicado em: (2012)
article Cellulose acetate/carbon nanotube composites by melt mixing
por: Lima, Ana Luísa Delgado
Publicado em: (2017)
por: Lima, Ana Luísa Delgado
Publicado em: (2017)
article Coupling mechanical and electrical behavior in the multi-scale simulation of polymer-based CNT nanocomposites
por: Simões, Ricardo
Publicado em: (2012)
por: Simões, Ricardo
Publicado em: (2012)
article Influence of graphite and carbon nanotubes on the mechanical and electrical properties of cast epoxy composites
por: Souza, Clarissa F. M. de
Publicado em: (2013)
por: Souza, Clarissa F. M. de
Publicado em: (2013)
article Electro-mechanical properties of triblock copolymer styrene-butadiene-styrene / carbon nanotube composites for large deformation sensor applications
por: Costa, P.
Publicado em: (2013)
por: Costa, P.
Publicado em: (2013)
category Monofilament composites with carbon nanotubes for textile sensor applications
por: Ferreira, Alexandre
Publicado em: (2011)
por: Ferreira, Alexandre
Publicado em: (2011)
article The influence of melt mixing on the stability of cellulose acetate and its carbon nanotube composites
por: Lima, Ana Luísa Delgado
Publicado em: (2016)
por: Lima, Ana Luísa Delgado
Publicado em: (2016)
article Effect of multiscale reinforcement on the mechanical properties and microstructure of microcrystalline cellulose-carbon nanotube reinforced cementitious composites
por: Alshaghel, Ahmad
Publicado em: (2018)
por: Alshaghel, Ahmad
Publicado em: (2018)
article Piezoresistive response of Pluronic wrapped single wall carbon nanotube : epoxy composites
por: Gonzalez-Dominguez, J. M.
Publicado em: (2012)
por: Gonzalez-Dominguez, J. M.
Publicado em: (2012)
Registos relacionados
-
article Physical and mechanical characterization of nanocomposites with carbon nanotubes functionalized with the matrix polymer
por: Paiva, M. C.
Publicado em: (2012) -
article Tuning electrical and thermoelectric properties of freestanding graphene oxide papers by carbon nanotubes and heat treatment
por: Okhay, O.
Publicado em: (2019) -
article Carbon nanotube-polyurethane composite sheets for flexible thermoelectric materials
por: Paleo, Antonio J.
Publicado em: (2023) -
article Mechanical and morphological characterization of polymer–carbon nanocomposites from functionalized carbon nanotubes
por: Paiva, M. C.
Publicado em: (2004) -
article High-performance PEEK/MWCNT nanocomposites: Combining enhanced electrical conductivity and nanotube dispersion
por: Silva, Sofia
Publicado em: (2024)