Publicação
Modeling the compressive strength of geopolymeric binders by gene expression programming-GEP
| Resumo: | GEP has been employed in this work to model the compressive strength of different types of geopolymers through six different schemes. The differences between the models were in their linking functions, number of genes, chromosomes and head sizes. The curing time, Ca(OH)2 content, the amount of superplasticizer, NaOH concentration, mold type, aluminosilicate source and H2O/Na2O molar ratio were the seven input parameters considered in the construction of the models to evaluate the compressive strength of geopolymers. A total number of 399 input-target pairs were collected from the literature, randomly divided into 299 and 100 sets and were trained and tested, respectively. The best performance model had 6 genes, 14 head size, 40 chromosomes and multiplication as linking function. This was shown by the absolute fraction of variance, the absolute percentage error and the root mean square error. These were of 0.9556, 2.4601 and 3.4716 for training phase, respectively and 0.9483, 2.8456 and 3.7959 for testing phase, respectively. However, another model with 7 genes, 12 head size, 30 chromosomes and addition as linking function showed suitable results with the absolute fraction of variance, the absolute percentage error and the root mean square of 0.9547, 2.5665 and 3.4360 for training phase, respectively and 0.9466, 2.8020 and 3.8047 for testing phase, respectively. These models showed that gene expression programming has a strong potential for predicting the compressive strength of different types of geopolymers in the considered range. |
|---|---|
| Autores principais: | Nazari, A. |
| Outros Autores: | Pacheco-Torgal, F. |
| Assunto: | Geopolymers Compressive strength Gene expression programming |
| Ano: | 2013 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | Universidade do Minho |
| Idioma: | inglês |
| Origem: | RepositóriUM - Universidade do Minho |
Registos relacionados
article Compressive strength of tungsten mine waste- and metakaolinbased geopolymers
por: Nazari, Ali
Publicado em: (2014)
por: Nazari, Ali
Publicado em: (2014)
article Performance of a fly ash geopolymeric based binder with calcium hydroxide, Portland cement and metakaolin as additives
por: Kheradmand, Mohammad
Publicado em: (2018)
por: Kheradmand, Mohammad
Publicado em: (2018)
article Improved shear strength prediction model of steel fiber reinforced concrete beams by adopting gene expression programming
por: Tariq, Moiz
Publicado em: (2022)
por: Tariq, Moiz
Publicado em: (2022)
article Prediction of the compressive strength of one-part geopolymers
por: Abdollahnejad, Zahra
Publicado em: (2015)
por: Abdollahnejad, Zahra
Publicado em: (2015)
article Investigations about the effect of aggregates on strength and microstructure of geopolymeric mine waste mud binders
por: Pacheco-Torgal, F.
Publicado em: (2007)
por: Pacheco-Torgal, F.
Publicado em: (2007)
article Predicting compressive strength of different geopolymers by artificial neural networks
por: Nazari, A.
Publicado em: (2013)
por: Nazari, A.
Publicado em: (2013)
article Preliminary experimental investigation on one-part geopolymer mixes
por: Abdollahnejad, Zahra
Publicado em: (2012)
por: Abdollahnejad, Zahra
Publicado em: (2012)
article Investigations on mix design of tungsten mine waste geopolymeric binder
por: Pacheco-Torgal, F.
Publicado em: (2008)
por: Pacheco-Torgal, F.
Publicado em: (2008)
article Soft computing-based models for the prediction of masonry compressive strength
por: Asteris, Panagiotis G.
Publicado em: (2021)
por: Asteris, Panagiotis G.
Publicado em: (2021)
article Eco-concrete: one-part geopolymer mixes
por: Abdollahnejad, Zahra
Publicado em: (2013)
por: Abdollahnejad, Zahra
Publicado em: (2013)
article Feasibility study of geopolymers for externally bonded reinforcement
por: Figeys, Wine
Publicado em: (2007)
por: Figeys, Wine
Publicado em: (2007)
article Statistical analysis of compressive strength of concrete specimens
por: Aguiar, J. L. Barroso de
Publicado em: (2003)
por: Aguiar, J. L. Barroso de
Publicado em: (2003)
article Evaluation of the compressive strength of ancient clay bricks using microdrilling
por: Fernandes, Francisco Manuel Carvalho Pinto
Publicado em: (2007)
por: Fernandes, Francisco Manuel Carvalho Pinto
Publicado em: (2007)
article Concrete repair with geopolymeric mortars: influence of mortars composition on their workability and mechanical strength
por: Moura, D.
Publicado em: (2011)
por: Moura, D.
Publicado em: (2011)
article Compressive strength and microstructure of hybrid alkaline cements
por: Abdollahnejad, Zahra
Publicado em: (2014)
por: Abdollahnejad, Zahra
Publicado em: (2014)
article Influence of the geometry of units and of the filling of vertical joints in the compressive and tensile strength of masonry
por: Haach, V. G.
Publicado em: (2010)
por: Haach, V. G.
Publicado em: (2010)
article Compressive strength, microstructure and hydration products of hybrid alkaline cements
por: Abdollahnejad, Zahra
Publicado em: (2014)
por: Abdollahnejad, Zahra
Publicado em: (2014)
article Using conformity control of concrete compressive strength for construction site classification
por: Cunha, P. J.
Publicado em: (2013)
por: Cunha, P. J.
Publicado em: (2013)
article The effect of superplasticizers on the workability and compressive strength of concrete made with fine recycled concrete aggregates
por: Pereira, P.
Publicado em: (2012)
por: Pereira, P.
Publicado em: (2012)
article Homogenization of masonry using a micro-mechanical model : compressive behaviour
por: Zucchini, Alberto
Publicado em: (2006)
por: Zucchini, Alberto
Publicado em: (2006)
article Development of foam one-part geopolymers with enhanced thermal insulation performance and low carbon dioxide emissions
por: Abdollahnejad, Zahra
Publicado em: (2015)
por: Abdollahnejad, Zahra
Publicado em: (2015)
article Compressive strength and durability properties of ceramic wastes based concrete
por: Pacheco-Torgal, F.
Publicado em: (2011)
por: Pacheco-Torgal, F.
Publicado em: (2011)
article Prediction of cement-based mortars compressive strength using machine learning techniques
por: Asteris, Panagiotis G.
Publicado em: (2021)
por: Asteris, Panagiotis G.
Publicado em: (2021)
article Data-driven models for uniaxial compressive strength prediction applied to unseen data
por: Tinoco, Joaquim Agostinho Barbosa
Publicado em: (2013)
por: Tinoco, Joaquim Agostinho Barbosa
Publicado em: (2013)
article Mechanics of masonry in compression : results from a homogenisation approach
por: Zucchini, Alberto
Publicado em: (2007)
por: Zucchini, Alberto
Publicado em: (2007)
article Application of data mining techniques in the estimation of the uniaxial compressive strength of jet grouting columns over time
por: Tinoco, Joaquim Agostinho Barbosa
Publicado em: (2011)
por: Tinoco, Joaquim Agostinho Barbosa
Publicado em: (2011)
article Influence of mortar type and unit type on compressive strength and stiffness of masonry
por: Briceño, C.
Publicado em: (2025)
por: Briceño, C.
Publicado em: (2025)
category High variability of gene expression in S. epidermidis biofilm population
por: França, Ângela
Publicado em: (2011)
por: França, Ângela
Publicado em: (2011)
article Towards the reconstruction of integrated genome-scale models of metabolism and gene expression
por: Cruz, Fernando
Publicado em: (2020)
por: Cruz, Fernando
Publicado em: (2020)
article Can we truly predict the compressive strength of concrete without knowing the properties of aggregates?
por: De Brito, Jorge
Publicado em: (2018)
por: De Brito, Jorge
Publicado em: (2018)
article A data mining approach for jet grouting uniaxial compressive strength prediction
por: Tinoco, Joaquim Agostinho Barbosa
Publicado em: (2009)
por: Tinoco, Joaquim Agostinho Barbosa
Publicado em: (2009)
article Mechanical performance of fly ash geopolymeric mortars containing phase change materials
por: Kheradmand, Mohammad
Publicado em: (2018)
por: Kheradmand, Mohammad
Publicado em: (2018)
article Thermal performance of fly ash geopolymeric mortars containing phase change materials
por: Kheradmand, Mohammad
Publicado em: (2018)
por: Kheradmand, Mohammad
Publicado em: (2018)
article Investigations of geopolymeric mixtures based on phosphate washing waste
por: Dabbebi, R.
Publicado em: (2018)
por: Dabbebi, R.
Publicado em: (2018)
article Mechanical performance of geopolymeric mortars based on tunisian calcined clay, fly ash and metakaolin
por: Tahri, W.
Publicado em: (2015)
por: Tahri, W.
Publicado em: (2015)
article Cross‐sectional and confining system unification on peak compressive strength of FRP confined concrete
por: Shayanfar, Javad
Publicado em: (2022)
por: Shayanfar, Javad
Publicado em: (2022)
article The investigation on strength and flexural toughness of fibre cocktail reinforced self-compacting high performance concrete
por: Ding Yining
Publicado em: (2009)
por: Ding Yining
Publicado em: (2009)
article Shrinkage and mechanical performance of geopolymeric mortars based on calcined Tunisian clay
por: Tahri, W.
Publicado em: (2013)
por: Tahri, W.
Publicado em: (2013)
article Concrete retrofitting using CFRP and geopolymer mortars
por: Vasconcelos, E.
Publicado em: (2011)
por: Vasconcelos, E.
Publicado em: (2011)
article Artificial neural networks to predict the mechanical properties of natural fibre-reinforced Compressed Earth Blocks (CEBs)
por: Chiara, Turco
Publicado em: (2021)
por: Chiara, Turco
Publicado em: (2021)
Registos relacionados
-
article Compressive strength of tungsten mine waste- and metakaolinbased geopolymers
por: Nazari, Ali
Publicado em: (2014) -
article Performance of a fly ash geopolymeric based binder with calcium hydroxide, Portland cement and metakaolin as additives
por: Kheradmand, Mohammad
Publicado em: (2018) -
article Improved shear strength prediction model of steel fiber reinforced concrete beams by adopting gene expression programming
por: Tariq, Moiz
Publicado em: (2022) -
article Prediction of the compressive strength of one-part geopolymers
por: Abdollahnejad, Zahra
Publicado em: (2015) -
article Investigations about the effect of aggregates on strength and microstructure of geopolymeric mine waste mud binders
por: Pacheco-Torgal, F.
Publicado em: (2007)