Publicação
Patterned separator membranes with pillar surface microstructures for improved battery performance
| Resumo: | In order to improve battery performance by tuning battery separator membranes, this work reports on porous poly(vinylidene fluoride-co-trifluoroethylene) - P(VDF-TrFE)- membranes with surface pillar microstructures. Separators with tailored pillar diameter, height and bulk thickness were fabricated by template patterning and computer simulations, allowing to evaluate the effect of the pillar microstructure characteristics on battery performance. It is shown that the different pillar microstructures of the separators affect the uptake value (150–325%), ionic conductivity value (0.8–1.6 mS·cm−1) and discharge capacity of the lithium ion batteries (LIB) when compared with the separator without pillars. The experimental charge-discharge behavior demonstrates that the pillar parameters affect battery performance and the best microstructure leading to 80 mAh·g−1 at 2C. Battery performance can be thus optimized by adjusting pillar diameter, height and bulk thickness of the separators keeping its volume constant, as demonstrated also by the simulation results. The parameter with most influence in battery performance is the bulk thickness of the separator, allowing to obtain a maximum discharge capacity value of 117.8 mAh·g−1 at 90C for a thickness of 0.01 mm. Thus, this work shows that the optimization of the pillar microstructure of the separator membranes allows increasing the capacity towards a new generation of high-performance LIBs. |
|---|---|
| Autores principais: | Gonçalves, Renato Ferreira |
| Outros Autores: | Miranda, D.; Marques-Almeida, T.; Silva, M.M.; Cardoso, Vanessa Fernandes; Almeida, A.M.; Costa, C.M.; Lanceros-Méndez, S. |
| Assunto: | Separator membrane Microstructure lithium-ion battery P(VDF-TrFE) Theoretical simulation Engenharia e Tecnologia::Engenharia dos Materiais |
| Ano: | 2021 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | Universidade do Minho |
| Idioma: | inglês |
| Origem: | RepositóriUM - Universidade do Minho |
Registos relacionados
article Evaluation of the main processing parameters influencing the performance of poly(vinylidene fluoride – trifluorethylene) lithium ion battery separators
por: Costa, C. M.
Publicado em: (2013)
por: Costa, C. M.
Publicado em: (2013)
article Porous membranes of montmorillonite/poly(vinylidene fluoride-trifluorethylene) for Li-ion battery separators
por: Lanceros-Méndez, S.
Publicado em: (2012)
por: Lanceros-Méndez, S.
Publicado em: (2012)
article Microporous membranes of NaY zeolite/poly(vinylidene fluoride-trifluoroethylene) for Li-ion battery separators
por: Pereira, J. Nunes
Publicado em: (2013)
por: Pereira, J. Nunes
Publicado em: (2013)
article Effect of degree of porosity on the properties of poly(vinylidene fluoride-trifluorethylene) for Li-ion battery separators
por: Costa, Carlos M.
Publicado em: (2012)
por: Costa, Carlos M.
Publicado em: (2012)
article Li-ion battery separator membranes based on poly(vinylidene fluoride-trifluoroethylene)/carbon nanotube composites
por: Pereira, J. Nunes
Publicado em: (2013)
por: Pereira, J. Nunes
Publicado em: (2013)
article Influence of different salts in poly(vinylidene fluoride-co-trifluoroethylene) electrolyte separator membranes for battery applications
por: Costa, C. M.
Publicado em: (2014)
por: Costa, C. M.
Publicado em: (2014)
article Novel poly(vinylidene fluoride-trifluoroethylene)/poly(ethylene oxide) blends for battery separators in lithium-ion applications
por: Costa, C. M.
Publicado em: (2013)
por: Costa, C. M.
Publicado em: (2013)
article Tailoring poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) membrane microstructure for lithium-ion battery separator applications
por: Pinto, Rafael S.
Publicado em: (2025)
por: Pinto, Rafael S.
Publicado em: (2025)
article Enhanced performance of fluorinated separator membranes for lithium ion batteries through surface micropatterning
por: Gonçalves, Renato Ferreira
Publicado em: (2019)
por: Gonçalves, Renato Ferreira
Publicado em: (2019)
article Effect of the microsctructure and lithium-ion content in poly[(vinylidene fluoride)-co-trifluoroethylene]/ lithium perchlorate trihydrat composite membranes for battery applications
por: Costa, Carlos M.
Publicado em: (2012)
por: Costa, Carlos M.
Publicado em: (2012)
article Effect of the degree of porosity on the performance of poly(vinylidene fluoride-trifluoroethylene)/poly(ethylene oxide) blend membranes for lithium-ion battery separators
por: Gören, Attila
Publicado em: (2015)
por: Gören, Attila
Publicado em: (2015)
article Effect of ionic liquid anion type in the performance of solid polymer electrolytes based on Poly(Vinylidene fluoride-trifluoroethylene)
por: Leones, Rita Daniela Barros
Publicado em: (2015)
por: Leones, Rita Daniela Barros
Publicado em: (2015)
article Electroactive poly(vinylidene fluoride – trifluorethylene) (PVDF-TrFE) microporous membranes for Lithium-ion battery applications
por: Costa, Carlos M.
Publicado em: (2012)
por: Costa, Carlos M.
Publicado em: (2012)
article Hydrophobic/hydrophilic P(VDF-TrFE)/PHEA polymer blend membranes
por: Tamaño-Machiavello, M. N.
Publicado em: (2016)
por: Tamaño-Machiavello, M. N.
Publicado em: (2016)
article Poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene): A new binder for conventional and printable lithium-Ion batteries
por: Barbosa, João C.
Publicado em: (2021)
por: Barbosa, João C.
Publicado em: (2021)
article Solid polymer electrolytes based on a high dielectric polymer and ionic liquids for lithium batteries
por: Barbosa, João C.
Publicado em: (2023)
por: Barbosa, João C.
Publicado em: (2023)
article Mesoporous poly(vinylidene fluoride-co-trifluoroethylene) membranes for lithium-ion battery separators
por: Costa, C. M.
Publicado em: (2019)
por: Costa, C. M.
Publicado em: (2019)
article Fiber average size and distribution dependence on electrospinning parameters of poly(vinylidene fluoride trifluoroethylene) (P(VDF-TrFE)) membranes for biomedical applications
por: Sencadas, Vítor João Gomes Silva
Publicado em: (2012)
por: Sencadas, Vítor João Gomes Silva
Publicado em: (2012)
article Development of solid polymer electrolytes based on poly(vinylidene fluoride-trifluoroethylene) and the [N1 1 1 2(OH)][NTf2] ionic liquid for energy storage applications
por: Leones, Rita Daniela Barros
Publicado em: (2013)
por: Leones, Rita Daniela Barros
Publicado em: (2013)
article Lithium-ion battery separator membranes based on poly(L-lactic acid) biopolymer
por: Barbosa, J. C.
Publicado em: (2020)
por: Barbosa, J. C.
Publicado em: (2020)
article Wool/soy protein isolate membranes as separators toward more sustainable lithium-ion batteries
por: Serra, J. P.
Publicado em: (2024)
por: Serra, J. P.
Publicado em: (2024)
book Polymer-based separators for lithium-ion batteries
por: Barbosa,J.C.
Publicado em: (2019)
por: Barbosa,J.C.
Publicado em: (2019)
article Poly(vinylidene fluoride-trifluoroethylene) porous films: tailoring microstructure and physical properties by solvent casting strategies
por: Cardoso, Vanessa Fernandes
Publicado em: (2015)
por: Cardoso, Vanessa Fernandes
Publicado em: (2015)
article Tailoring electroactive poly(vinylidene fluorideco-trifluoroethylene) microspheres by a nanoprecipitation method
por: Macedo, A. S.
Publicado em: (2020)
por: Macedo, A. S.
Publicado em: (2020)
article Sustainable lithium-ion battery separators based on poly(3-Hydroxybutyrate-Co-Hydroxyvalerate) pristine and composite electrospun membranes
por: Barbosa, J. C.
Publicado em: (2022)
por: Barbosa, J. C.
Publicado em: (2022)
article Magnetic ionic liquid/polymer composites: Tailoring physico-chemical properties by ionic liquid content and solvent evaporation temperature
por: Correia, Daniela Maria Silva
Publicado em: (2019)
por: Correia, Daniela Maria Silva
Publicado em: (2019)
article Composition dependent physical properties of poly[(vinylidene fluoride)-co-trifluoroethylene] - poly(ethylene oxide) blends
por: Costa, C. M.
Publicado em: (2013)
por: Costa, C. M.
Publicado em: (2013)
article Silica/poly(vinylidene fluoride) porous composite membranes for lithium-ion battery separators
por: Costa, C. M.
Publicado em: (2018)
por: Costa, C. M.
Publicado em: (2018)
article Recent advances on battery separators based on poly(vinylidene fluoride) and its copolymers for lithium-ion battery applications
por: Costa, Carlos M.
Publicado em: (2021)
por: Costa, Carlos M.
Publicado em: (2021)
article Sustainable lithium-ion battery separator membranes based on carrageenan biopolymer
por: Serra, João Pedro Cruz
Publicado em: (2022)
por: Serra, João Pedro Cruz
Publicado em: (2022)
article Thermomagnetic energy conversion evaluation of Permalloy/Platinum multilayers on poly(vinylidene fluoride)-based flexible substrates
por: Ferreira, Armando José Barros
Publicado em: (2025)
por: Ferreira, Armando José Barros
Publicado em: (2025)
article Recent advances in poly(Vinylidene fluoride) and its copolymers for lithium-ion battery separators
por: Barbosa, J. C.
Publicado em: (2018)
por: Barbosa, J. C.
Publicado em: (2018)
article Silk fibroin and sericin polymer blends for sustainable battery separators
por: Reizabal, A.
Publicado em: (2022)
por: Reizabal, A.
Publicado em: (2022)
article Metal organic framework based PVDF separators for high rate cycling lithium-ion batteries
por: Valverde, Ainara
Publicado em: (2020)
por: Valverde, Ainara
Publicado em: (2020)
article Influence of fluoropolymer binders on the electrochemical performance of C-LiFePO4 based cathodes
por: Goren, A.
Publicado em: (2016)
por: Goren, A.
Publicado em: (2016)
article Tailoring silk fibroin separator membranes pore size for improving performance of lithium ion batteries
por: Reizabal, A.
Publicado em: (2020)
por: Reizabal, A.
Publicado em: (2020)
article Polymer-based membranes for oily wastewater remediation
por: Zioui, Djamila
Publicado em: (2020)
por: Zioui, Djamila
Publicado em: (2020)
article Influence of the porosity degree of poly(vinylidene fluoride-co-hexafluoropropylene) separators in the performance of Li-ion batteries
por: Sousa, R. E.
Publicado em: (2014)
por: Sousa, R. E.
Publicado em: (2014)
article Sustainable lithium-ion battery separators based on cellulose and soy protein membranes
por: Serra, João P.
Publicado em: (2023)
por: Serra, João P.
Publicado em: (2023)
book Synthetic polymer-based membrane for lithium Ion batteries
por: Martins, P
Publicado em: (2020)
por: Martins, P
Publicado em: (2020)
Registos relacionados
-
article Evaluation of the main processing parameters influencing the performance of poly(vinylidene fluoride – trifluorethylene) lithium ion battery separators
por: Costa, C. M.
Publicado em: (2013) -
article Porous membranes of montmorillonite/poly(vinylidene fluoride-trifluorethylene) for Li-ion battery separators
por: Lanceros-Méndez, S.
Publicado em: (2012) -
article Microporous membranes of NaY zeolite/poly(vinylidene fluoride-trifluoroethylene) for Li-ion battery separators
por: Pereira, J. Nunes
Publicado em: (2013) -
article Effect of degree of porosity on the properties of poly(vinylidene fluoride-trifluorethylene) for Li-ion battery separators
por: Costa, Carlos M.
Publicado em: (2012) -
article Li-ion battery separator membranes based on poly(vinylidene fluoride-trifluoroethylene)/carbon nanotube composites
por: Pereira, J. Nunes
Publicado em: (2013)