Publicação

Monitoring of biological wastewater treatment processes using indirect spectroscopic techniques

Ver documento

Detalhes bibliográficos
Resumo:Real-time monitoring can enhance the performance of biological wastewater treatment processes by preventing incidents that can lead to the imbalance of the system and eventually to the total loss of biological activity. For this purpose, in-situ monitoring techniques should not require sample pre-treatment and chemicals addition. Nowadays automation is still limited by poor sensor performance and high maintenance costs. Hence, further investigation is required in order to achieve new developments in monitoring techniques. Spectroscopic methods together with chemometrics are being presented as a powerful tool for process monitoring and control, since they can be fast, non-destructive and without the use of chemicals. In this work, UV-Visible and Near-Infrared (NIR) spectroscopy were used to monitor an activated sludge process using immersion probes connected to the respective spectrophotometers through optical fibbers. During two monitoring periods changes were induced to the system to test the ability of both probes in detecting them. While UV-Visible spectroscopy showed to be suitable for on-line monitoring, by detecting chemical oxygen demand (COD) variations in the effluent and identifying different nitrification status, NIR range also demonstrated potentialities, however, due to several experimental constrains, the results were not conclusive. Partial least squares (PLS) regression was performed for the prediction of COD, nitrate and total suspended solids (TSS) concentrations in the effluent using immersible UV-Visible probe and off-line spectra acquisition. The best results were obtained for the in-situ technique. The root mean squared error of cross validation (RMSECV) obtained for the estimative of each parameter was 15.4 mg O2/L for COD, 19.0 mg N-NO3 -/L for nitrate and 35.3 mg/L for TSS. In-situ UV-Visible range proved to be valuable for the monitoring and control of biological wastewater treatment processes, although some improvements identified in this work are still needed to overcome its limitations.
Autores principais:Paulo, Ana M. S.
Ano:2008
País:Portugal
Tipo de documento:dissertação de mestrado
Tipo de acesso:acesso aberto
Instituição associada:Universidade do Minho
Idioma:inglês
Origem:RepositóriUM - Universidade do Minho
_version_ 1867438144695042048
author Paulo, Ana M. S.
author_facet Paulo, Ana M. S.
author_role author
contributor_name_str_mv Ferreira, Eugénio C.
Dias, A. M. A.
RepositóriUM - Universidade do Minho
country_str PT
creators_json_txt [{\"Person.name\":\"Paulo, Ana M. S.\"}]
datacite.contributors.contributor.contributorName.fl_str_mv Ferreira, Eugénio C.
Dias, A. M. A.
RepositóriUM - Universidade do Minho
datacite.creators.creator.creatorName.fl_str_mv Paulo, Ana M. S.
datacite.date.Accepted.fl_str_mv 2008-12-19T00:00:00Z
datacite.date.available.fl_str_mv 2009-11-09T15:01:18Z
datacite.date.embargoed.fl_str_mv 2009-11-09T15:01:18Z
datacite.rights.fl_str_mv http://purl.org/coar/access_right/c_abf2
datacite.titles.title.fl_str_mv Monitoring of biological wastewater treatment processes using indirect spectroscopic techniques
dc.contributor.none.fl_str_mv Ferreira, Eugénio C.
Dias, A. M. A.
RepositóriUM - Universidade do Minho
dc.creator.none.fl_str_mv Paulo, Ana M. S.
dc.date.Accepted.fl_str_mv 2008-12-19T00:00:00Z
dc.date.available.fl_str_mv 2009-11-09T15:01:18Z
dc.date.embargoed.fl_str_mv 2009-11-09T15:01:18Z
dc.format.none.fl_str_mv application/pdf
dc.identifier.none.fl_str_mv https://hdl.handle.net/1822/9712
dc.language.none.fl_str_mv eng
dc.rights.none.fl_str_mv http://purl.org/coar/access_right/c_abf2
dc.title.fl_str_mv Monitoring of biological wastewater treatment processes using indirect spectroscopic techniques
dc.type.none.fl_str_mv http://purl.org/coar/resource_type/c_bdcc
description Real-time monitoring can enhance the performance of biological wastewater treatment processes by preventing incidents that can lead to the imbalance of the system and eventually to the total loss of biological activity. For this purpose, in-situ monitoring techniques should not require sample pre-treatment and chemicals addition. Nowadays automation is still limited by poor sensor performance and high maintenance costs. Hence, further investigation is required in order to achieve new developments in monitoring techniques. Spectroscopic methods together with chemometrics are being presented as a powerful tool for process monitoring and control, since they can be fast, non-destructive and without the use of chemicals. In this work, UV-Visible and Near-Infrared (NIR) spectroscopy were used to monitor an activated sludge process using immersion probes connected to the respective spectrophotometers through optical fibbers. During two monitoring periods changes were induced to the system to test the ability of both probes in detecting them. While UV-Visible spectroscopy showed to be suitable for on-line monitoring, by detecting chemical oxygen demand (COD) variations in the effluent and identifying different nitrification status, NIR range also demonstrated potentialities, however, due to several experimental constrains, the results were not conclusive. Partial least squares (PLS) regression was performed for the prediction of COD, nitrate and total suspended solids (TSS) concentrations in the effluent using immersible UV-Visible probe and off-line spectra acquisition. The best results were obtained for the in-situ technique. The root mean squared error of cross validation (RMSECV) obtained for the estimative of each parameter was 15.4 mg O2/L for COD, 19.0 mg N-NO3 -/L for nitrate and 35.3 mg/L for TSS. In-situ UV-Visible range proved to be valuable for the monitoring and control of biological wastewater treatment processes, although some improvements identified in this work are still needed to overcome its limitations.
dirty 0
eu_rights_str_mv openAccess
format masterThesis
fulltext.url.fl_str_mv https://repositorium.uminho.pt/bitstreams/4109006f-f581-4cce-9e7e-3049b4d7a95f/download
id rum_d7dcff632aa331f5d9fdfb1aebf28101
identifier.url.fl_str_mv https://hdl.handle.net/1822/9712
instacron_str repositorium
institution Universidade do Minho
instname_str Universidade do Minho
language eng
network_acronym_str rum
network_name_str RepositóriUM - Universidade do Minho
oai_identifier_str oai:repositorium.uminho.pt:1822/9712
organization_str_mv urn:organizationAcronym:repositorium
person_str_mv Paulo, Ana M. S.
publishDate 2008
reponame_str RepositóriUM - Universidade do Minho
repository_id_str urn:repositoryAcronym:rum
service_str_mv urn:repositoryAcronym:rum
spelling engporReal-time monitoring can enhance the performance of biological wastewater treatment processes by preventing incidents that can lead to the imbalance of the system and eventually to the total loss of biological activity. For this purpose, in-situ monitoring techniques should not require sample pre-treatment and chemicals addition. Nowadays automation is still limited by poor sensor performance and high maintenance costs. Hence, further investigation is required in order to achieve new developments in monitoring techniques. Spectroscopic methods together with chemometrics are being presented as a powerful tool for process monitoring and control, since they can be fast, non-destructive and without the use of chemicals. In this work, UV-Visible and Near-Infrared (NIR) spectroscopy were used to monitor an activated sludge process using immersion probes connected to the respective spectrophotometers through optical fibbers. During two monitoring periods changes were induced to the system to test the ability of both probes in detecting them. While UV-Visible spectroscopy showed to be suitable for on-line monitoring, by detecting chemical oxygen demand (COD) variations in the effluent and identifying different nitrification status, NIR range also demonstrated potentialities, however, due to several experimental constrains, the results were not conclusive. Partial least squares (PLS) regression was performed for the prediction of COD, nitrate and total suspended solids (TSS) concentrations in the effluent using immersible UV-Visible probe and off-line spectra acquisition. The best results were obtained for the in-situ technique. The root mean squared error of cross validation (RMSECV) obtained for the estimative of each parameter was 15.4 mg O2/L for COD, 19.0 mg N-NO3 -/L for nitrate and 35.3 mg/L for TSS. In-situ UV-Visible range proved to be valuable for the monitoring and control of biological wastewater treatment processes, although some improvements identified in this work are still needed to overcome its limitations.application/pdfporMonitoring of biological wastewater treatment processes using indirect spectroscopic techniquesPaulo, Ana M. S.Ferreira, Eugénio C.Dias, A. M. A.HostingInstitutionOrganizationalRepositóriUM - Universidade do Minhoe-mailmailto:repositorium@usdb.uminho.ptrepositorium@usdb.uminho.pt2009-11-09T15:01:18Z2008-12-192008-09-262008-12-19T00:00:00ZHandlehttps://hdl.handle.net/1822/9712http://purl.org/coar/access_right/c_abf2open access2381389 bytesliteraturehttp://purl.org/coar/resource_type/c_bdccmaster thesishttp://purl.org/coar/access_right/c_abf2application/pdffulltexthttps://repositorium.uminho.pt/bitstreams/4109006f-f581-4cce-9e7e-3049b4d7a95f/download
spellingShingle Monitoring of biological wastewater treatment processes using indirect spectroscopic techniques
Paulo, Ana M. S.
status SINGLETON
title Monitoring of biological wastewater treatment processes using indirect spectroscopic techniques
title_full Monitoring of biological wastewater treatment processes using indirect spectroscopic techniques
title_fullStr Monitoring of biological wastewater treatment processes using indirect spectroscopic techniques
title_full_unstemmed Monitoring of biological wastewater treatment processes using indirect spectroscopic techniques
title_short Monitoring of biological wastewater treatment processes using indirect spectroscopic techniques
title_sort Monitoring of biological wastewater treatment processes using indirect spectroscopic techniques
url https://hdl.handle.net/1822/9712
visible 1