Publicação
On the use of high viscosity polymers in the fused filament fabrication process
| Resumo: | Purpose - This work aims to provide additional insights regarding the practicability of using conventional materials in the fused filament fabrication (FFF) process.Design/methodology/approach - Two different acrylonitryle butadiene styrene (ABS) grades are studied and compared, aiming to check to what extent the regular ABS developed for conventional polymer processing, with a different rheology than the one provided for the FFF process, can also be used in this process (FFF).Findings - The rheological results show that a general-purpose ABS (ABS-GP) melt is much more viscous and elastic than ABS-FFF. It is clear that using ABS-GP as feedstock material in the FFF process results in poor coalescence and adhesion between the extruded filaments, which has a detrimental effect on the mechanical properties of the printed specimens. Despite its lower performance, ABS-GP can be a good choice if the objective is to produce an aesthetical prototype. If the objective is to produce a functional prototype or a final part, its mechanical performance requirements will dictate the choice.Originality/value - This work provides insightful information regarding the use of high viscosity materials on the 3D printing process. |
|---|---|
| Autores principais: | Khaliq, Muhammad Hussam |
| Outros Autores: | Gomes, Rui; Fernandes, Célio Bruno Pinto; Nóbrega, J. M.; Carneiro, O. S.; Ferrás, Luís Jorge Lima |
| Assunto: | Printing Fused deposition modelling 3D |
| Ano: | 2017 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso restrito |
| Instituição associada: | Universidade do Minho |
| Idioma: | inglês |
| Origem: | RepositóriUM - Universidade do Minho |
| _version_ | 1867438380728451072 |
|---|---|
| author | Khaliq, Muhammad Hussam |
| author2 | Gomes, Rui Fernandes, Célio Bruno Pinto Nóbrega, J. M. Carneiro, O. S. Ferrás, Luís Jorge Lima |
| author2_role | author author author author author |
| author_facet | Khaliq, Muhammad Hussam Gomes, Rui Fernandes, Célio Bruno Pinto Nóbrega, J. M. Carneiro, O. S. Ferrás, Luís Jorge Lima |
| author_role | author |
| contributor_name_str_mv | RepositóriUM - Universidade do Minho |
| country_str | PT |
| creators_json_txt | [{\"Person.name\":\"Khaliq, Muhammad Hussam\"},{\"Person.name\":\"Gomes, Rui\"},{\"Person.name\":\"Fernandes, Célio Bruno Pinto\"},{\"Person.name\":\"Nóbrega, J. M.\"},{\"Person.name\":\"Carneiro, O. S.\"},{\"Person.name\":\"Ferrás, Luís Jorge Lima\"}] |
| datacite.contributors.contributor.contributorName.fl_str_mv | RepositóriUM - Universidade do Minho |
| datacite.creators.creator.creatorName.fl_str_mv | Khaliq, Muhammad Hussam Gomes, Rui Fernandes, Célio Bruno Pinto Nóbrega, J. M. Carneiro, O. S. Ferrás, Luís Jorge Lima |
| datacite.date.Accepted.fl_str_mv | 2017-01-01T00:00:00Z |
| datacite.rights.fl_str_mv | http://purl.org/coar/access_right/c_16ec |
| datacite.subjects.subject.fl_str_mv | Printing Fused deposition modelling 3D |
| datacite.titles.title.fl_str_mv | On the use of high viscosity polymers in the fused filament fabrication process |
| dc.contributor.none.fl_str_mv | RepositóriUM - Universidade do Minho |
| dc.creator.none.fl_str_mv | Khaliq, Muhammad Hussam Gomes, Rui Fernandes, Célio Bruno Pinto Nóbrega, J. M. Carneiro, O. S. Ferrás, Luís Jorge Lima |
| dc.date.Accepted.fl_str_mv | 2017-01-01T00:00:00Z |
| dc.format.none.fl_str_mv | application/pdf |
| dc.identifier.none.fl_str_mv | https://hdl.handle.net/1822/47547 |
| dc.language.none.fl_str_mv | eng |
| dc.publisher.none.fl_str_mv | Emerald Group Publishing Ltd |
| dc.rights.none.fl_str_mv | http://purl.org/coar/access_right/c_16ec |
| dc.subject.none.fl_str_mv | Printing Fused deposition modelling 3D |
| dc.title.fl_str_mv | On the use of high viscosity polymers in the fused filament fabrication process |
| dc.type.none.fl_str_mv | http://purl.org/coar/resource_type/c_6501 |
| description | Purpose - This work aims to provide additional insights regarding the practicability of using conventional materials in the fused filament fabrication (FFF) process.Design/methodology/approach - Two different acrylonitryle butadiene styrene (ABS) grades are studied and compared, aiming to check to what extent the regular ABS developed for conventional polymer processing, with a different rheology than the one provided for the FFF process, can also be used in this process (FFF).Findings - The rheological results show that a general-purpose ABS (ABS-GP) melt is much more viscous and elastic than ABS-FFF. It is clear that using ABS-GP as feedstock material in the FFF process results in poor coalescence and adhesion between the extruded filaments, which has a detrimental effect on the mechanical properties of the printed specimens. Despite its lower performance, ABS-GP can be a good choice if the objective is to produce an aesthetical prototype. If the objective is to produce a functional prototype or a final part, its mechanical performance requirements will dictate the choice.Originality/value - This work provides insightful information regarding the use of high viscosity materials on the 3D printing process. |
| dirty | 0 |
| eu_rights_str_mv | restrictedAccess |
| format | article |
| fulltext.url.fl_str_mv | https://repositorium.uminho.pt/bitstreams/d73a0049-7bc6-4908-89ba-4a1df42a7461/download |
| id | rum_e1979077945aad8bb367e4e4debdd661 |
| identifier.url.fl_str_mv | https://hdl.handle.net/1822/47547 |
| instacron_str | repositorium |
| institution | Universidade do Minho |
| instname_str | Universidade do Minho |
| language | eng |
| network_acronym_str | rum |
| network_name_str | RepositóriUM - Universidade do Minho |
| oai_identifier_str | oai:repositorium.uminho.pt:1822/47547 |
| organization_str_mv | urn:organizationAcronym:repositorium |
| person_str_mv | Khaliq, Muhammad Hussam Gomes, Rui Fernandes, Célio Bruno Pinto Nóbrega, J. M. Carneiro, O. S. Ferrás, Luís Jorge Lima |
| publishDate | 2017 |
| publisher.none.fl_str_mv | Emerald Group Publishing Ltd |
| reponame_str | RepositóriUM - Universidade do Minho |
| repository_id_str | urn:repositoryAcronym:rum |
| service_str_mv | urn:repositoryAcronym:rum |
| spelling | engEmerald Group Publishing LtdporPurpose - This work aims to provide additional insights regarding the practicability of using conventional materials in the fused filament fabrication (FFF) process.Design/methodology/approach - Two different acrylonitryle butadiene styrene (ABS) grades are studied and compared, aiming to check to what extent the regular ABS developed for conventional polymer processing, with a different rheology than the one provided for the FFF process, can also be used in this process (FFF).Findings - The rheological results show that a general-purpose ABS (ABS-GP) melt is much more viscous and elastic than ABS-FFF. It is clear that using ABS-GP as feedstock material in the FFF process results in poor coalescence and adhesion between the extruded filaments, which has a detrimental effect on the mechanical properties of the printed specimens. Despite its lower performance, ABS-GP can be a good choice if the objective is to produce an aesthetical prototype. If the objective is to produce a functional prototype or a final part, its mechanical performance requirements will dictate the choice.Originality/value - This work provides insightful information regarding the use of high viscosity materials on the 3D printing process.application/pdfporOn the use of high viscosity polymers in the fused filament fabrication processKhaliq, Muhammad HussamGomes, RuiFernandes, Célio Bruno PintoNóbrega, J. M.Carneiro, O. S.Ferrás, Luís Jorge LimaHostingInstitutionOrganizationalRepositóriUM - Universidade do Minhoe-mailmailto:repositorium@usdb.uminho.ptrepositorium@usdb.uminho.ptISSNIsPartOf1355-2546DOIIsPartOf10.1108/RPJ-02-2016-002720172017-11-17T14:11:47Z2017-01-01T00:00:00ZHandlehttps://hdl.handle.net/1822/47547http://purl.org/coar/access_right/c_16ecrestricted accessPrintingFused deposition modelling3D540778 bytesliteraturehttp://purl.org/coar/resource_type/c_6501journal articlehttp://purl.org/coar/access_right/c_16ecapplication/pdffulltexthttps://repositorium.uminho.pt/bitstreams/d73a0049-7bc6-4908-89ba-4a1df42a7461/download |
| spellingShingle | On the use of high viscosity polymers in the fused filament fabrication process Khaliq, Muhammad Hussam Printing Fused deposition modelling 3D |
| status | SINGLETON |
| subject.fl_str_mv | Printing Fused deposition modelling 3D |
| title | On the use of high viscosity polymers in the fused filament fabrication process |
| title_full | On the use of high viscosity polymers in the fused filament fabrication process |
| title_fullStr | On the use of high viscosity polymers in the fused filament fabrication process |
| title_full_unstemmed | On the use of high viscosity polymers in the fused filament fabrication process |
| title_short | On the use of high viscosity polymers in the fused filament fabrication process |
| title_sort | On the use of high viscosity polymers in the fused filament fabrication process |
| topic | Printing Fused deposition modelling 3D |
| topic_facet | Printing Fused deposition modelling 3D |
| url | https://hdl.handle.net/1822/47547 |
| visible | 1 |