Publicação
Brazing of high-strength steels
| Resumo: | Zinc-coated high-strength steels (HSS) and advanced high-strength steels (AHSSs) are widely employed in automobile body manufacturing owing to their impressive metallurgical and mechanical characteristics. However, acquiring defect-free and mechanically sound welding joints is still quite challenging due to the formation of various defects, namely porosity, loss of coating, and the evolution of undesired microstructural phases in both the heat-affected zone and the fusion zone. The higher heat input during conventional fusion welding processes tends to exacerbate these challenges. Brazing, sometimes referred to as weld-brazing, is a comparatively new joining process that offers the ability to join thin and zinc-coated steel sheets with a significantly lower heat input using a compatible lower melting temperature filler wire, has been proposed as an alternative to fusion-based joining techniques. However, under-matching, i.e., mechanically weaker brazing filler than that of the base metal, limits the widespread application of brazing. In this regard, several developments have been reported to overcome under-matching by changing the filler composition, coating composition, and joining methodology. This comprehensive review highlights the key challenges associated with steel-to-steel brazing, while offering a detailed survey of various methods that can be used to improve the performance of brazed joints. |
|---|---|
| Autores principais: | Singh, Jaivindra |
| Outros Autores: | Khan, Muhammad Shehryar; Oliveira, J. P.; Arora, Kanwer Singh |
| Assunto: | Bead shape Intermetallic phases Joint strength Non-fusion joining techniques Weld-brazing Strategy and Management Management Science and Operations Research Industrial and Manufacturing Engineering |
| Ano: | 2024 |
| País: | Portugal |
| Tipo de documento: | recensão |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | Universidade Nova de Lisboa |
| Idioma: | inglês |
| Origem: | Repositório Institucional da UNL |
Registos relacionados
article Advances in induction brazing of copper and dissimilar metals: challenges and emerging trends
por: Lemma, Eyuel A.
Publicado em: (2025)
por: Lemma, Eyuel A.
Publicado em: (2025)
article Brazing of copper pipes for heat pump and refrigeration applications
por: Pereira, António B.
Publicado em: (2024)
por: Pereira, António B.
Publicado em: (2024)
article Strength of epoxy adhesive-bonded stainless-steel joints
por: Morais, A.B. de
Publicado em: (2007)
por: Morais, A.B. de
Publicado em: (2007)
article Resistance spot welded NiTi shape memory alloy to Ti6Al4V
por: Zang, Yihu
Publicado em: (2025)
por: Zang, Yihu
Publicado em: (2025)
article The evaluation of laser weldability of the third-generation advanced high strength steel
por: Pereira, António B.
Publicado em: (2019)
por: Pereira, António B.
Publicado em: (2019)
rate_review Arc Welding Processes as Practical Solutions to Join Ceramics
por: Lopes, J. G.
Publicado em: (2025)
por: Lopes, J. G.
Publicado em: (2025)
book Computational modelling of T-joint fillet welding
por: Fernandes, F. A. O.
Publicado em: (2021)
por: Fernandes, F. A. O.
Publicado em: (2021)
article Multisensor inspection of laser-brazed joints in the automotive industry
por: Machado, Miguel A.
Publicado em: (2021)
por: Machado, Miguel A.
Publicado em: (2021)
school Tig welding of iron-based shape memory alloys
por: Martins, Diogo Miguel Parreira
Publicado em: (2022)
por: Martins, Diogo Miguel Parreira
Publicado em: (2022)
article Mechanical properties of Ti6Al4V fabricated by laser powder bed fusion: a review focused on the processing and microstructural parameters influence on the final properties
por: Bartolomeu, Flávio
Publicado em: (2022)
por: Bartolomeu, Flávio
Publicado em: (2022)
article On the use of the cumulative strain energy density for fatigue life assessment in advanced high-strength steels
por: Branco, R.
Publicado em: (2022)
por: Branco, R.
Publicado em: (2022)
article Laser welding of H-phase strengthened Ni-rich NiTi-20Zr high temperature shape memory alloy
por: Oliveira, João Pedro
Publicado em: (2021)
por: Oliveira, João Pedro
Publicado em: (2021)
school Adequação dos legados móveis para BI na TMN e construção de uma nova estrutura comercial e de parceiros
por: Lopes, Nuno Miguel Ramos
Publicado em: (2011)
por: Lopes, Nuno Miguel Ramos
Publicado em: (2011)
article Non-Destructive Inspection of High Temperature Piping Combining Ultrasound and Eddy Current Testing
por: Santos, David
Publicado em: (2023)
por: Santos, David
Publicado em: (2023)
book Engineering systems and networks: the way ahead for industrial engineering and operations management: book of proceedings of the ICIEOM-CIO-IIIE, International Conference 2015
por: Amorim, Marlene Paula Castro
Publicado em: (2015)
por: Amorim, Marlene Paula Castro
Publicado em: (2015)
description The H-join of arbitrary families of graphs
por: Cardoso, Domingos M.
Publicado em: (2021)
por: Cardoso, Domingos M.
Publicado em: (2021)
article Microstructure, Thermal, and Mechanical Behavior of NiTi Shape Memory Alloy Obtained by Micro Wire and Arc Direct Energy Deposition
por: Silva, Tadeu C. da
Publicado em: (2025)
por: Silva, Tadeu C. da
Publicado em: (2025)
rate_review A review on physics-informed machine learning for process-structure-property modeling in additive manufacturing
por: Faegh, Meysam
Publicado em: (2025)
por: Faegh, Meysam
Publicado em: (2025)
article Steel-copper functionally graded material produced by twin-wire and arc additive manufacturing (T-WAAM)
por: Rodrigues, Tiago A.
Publicado em: (2022)
por: Rodrigues, Tiago A.
Publicado em: (2022)
school Laser welding of thermoplastic matrix composites
por: Almeida, Nuno Miguel Sequeira de
Publicado em: (2021)
por: Almeida, Nuno Miguel Sequeira de
Publicado em: (2021)
school Study and Validation of Constitutive Models for AHSS Steels
por: Figueira, José Tomé Serra Afonso
Publicado em: (2018)
por: Figueira, José Tomé Serra Afonso
Publicado em: (2018)
school Evaluation of the parameters of a bead milling process to produce a non-aqueous nanosuspension
por: Ribeiro, Carolina Janardo
Publicado em: (2017)
por: Ribeiro, Carolina Janardo
Publicado em: (2017)
school Welding of High Entropy Alloys
por: Shen, Jiajia
Publicado em: (2022)
por: Shen, Jiajia
Publicado em: (2022)
article Prediction of the layer longitudinal compression strength
por: Morais, A. Balacó de
Publicado em: (2000)
por: Morais, A. Balacó de
Publicado em: (2000)
groups A JSON/HTTP communication protocol to support the development of distributed cyber-physical systems
por: Pereira, Fernando
Publicado em: (2018)
por: Pereira, Fernando
Publicado em: (2018)
article Influence of multiple debonding defects on the behaviour of mechanically anchored CFRP-to-steel joints
por: Biscaia, Hugo C.
Publicado em: (2025)
por: Biscaia, Hugo C.
Publicado em: (2025)
school Business in practice: a performance review of proxima´s electrification
por: Leitão, João Pedro Cardoso
Publicado em: (2024)
por: Leitão, João Pedro Cardoso
Publicado em: (2024)
school Optimization of the wet strength agent load in the tissue papermaking
por: Ferreira, Gustavo Aparecido Bueno
Publicado em: (2021)
por: Ferreira, Gustavo Aparecido Bueno
Publicado em: (2021)
school Additive manufacturing Of High Entropy Alloys
por: Marco, João Augusto Oliveira de
Publicado em: (2023)
por: Marco, João Augusto Oliveira de
Publicado em: (2023)
article Building better biobetters: from fundamentals to industrial application
por: Torres-Obreque, Karin M.
Publicado em: (2022)
por: Torres-Obreque, Karin M.
Publicado em: (2022)
article Combining business process management and lean manufacturing to improve information and documentation flows: a case study
por: Calçado, Rodrigo
Publicado em: (2024)
por: Calçado, Rodrigo
Publicado em: (2024)
article HRM strength, situation strength and improvisation behavior
por: Ribeiro, Tânia Rodrigues
Publicado em: (2011)
por: Ribeiro, Tânia Rodrigues
Publicado em: (2011)
school Laser welding of morphologically dissimilar thermoplastic structures
por: Ferreira, António José de Oliveira
Publicado em: (2025)
por: Ferreira, António José de Oliveira
Publicado em: (2025)
category European life project: a global strategy for the responsible use of a coastal lagoon: a case study from Portugal
por: Alves, Fátima
Publicado em: (2000)
por: Alves, Fátima
Publicado em: (2000)
groups A geometrical non-linear model for cable systems analysis
por: Varum, H.
Publicado em: (2005)
por: Varum, H.
Publicado em: (2005)
rate_review Engineering-to-order manufacturing
por: Fortes, C. S.
Publicado em: (2023)
por: Fortes, C. S.
Publicado em: (2023)
article The influence of data shape acquisition process and geometric accuracy of the mandible for numerical simulation
por: Relvas, C.
Publicado em: (2011)
por: Relvas, C.
Publicado em: (2011)
article Modelling lamina longitudinal compression strength of carbon fibre composite laminates
por: Morais, A. Balacó de
Publicado em: (1996)
por: Morais, A. Balacó de
Publicado em: (1996)
school Algorithmic design for customizable products with additive manufacturing
por: Fonseca, Rodrigo Rocha Lopes da
Publicado em: (2021)
por: Fonseca, Rodrigo Rocha Lopes da
Publicado em: (2021)
school Ai in the european manufacturing industry - a management guide
por: Rettmann, Florian Christopher
Publicado em: (2020)
por: Rettmann, Florian Christopher
Publicado em: (2020)
Registos relacionados
-
article Advances in induction brazing of copper and dissimilar metals: challenges and emerging trends
por: Lemma, Eyuel A.
Publicado em: (2025) -
article Brazing of copper pipes for heat pump and refrigeration applications
por: Pereira, António B.
Publicado em: (2024) -
article Strength of epoxy adhesive-bonded stainless-steel joints
por: Morais, A.B. de
Publicado em: (2007) -
article Resistance spot welded NiTi shape memory alloy to Ti6Al4V
por: Zang, Yihu
Publicado em: (2025) -
article The evaluation of laser weldability of the third-generation advanced high strength steel
por: Pereira, António B.
Publicado em: (2019)