Publicação
Integrated WPT-PLC System Applied to UAV
| Resumo: | WPT system performances highly depend on the misalignment scenarios of the transmitter or the receiver coil. In this contribution, the authors analyze the effect of the misalignment influencing factors of the integrated WPT-PLC system receiving coil on the system performances. The simulations and experimental analysis are based on power efficiency and channel capacity metrics. The simulations are performed using finite element calculations in COMSOL Multiphysics and Advanced Design System (ADS) from Keysight technology. By analyzing the results, maximum transferred power is reached under resonance conditions. For instance, the calculated efficiencies versus the misalignment cases of the WPT-PLC system varies (η = 86% to 60%) when d = [3 cm to 7 cm], s = [3 cm to 9 cm], and for a tilt angle θ ≤ 20 deg, while the optimal data rate C(bps) is achieved while appealing different data access points and under reasonable SNR value. |
|---|---|
| Autores principais: | Zouaoui, Safa |
| Outros Autores: | Dghais, Wael; Romba, Luís; Melício, Rui; Belgacem, Hamdi |
| Assunto: | bandwidth data communication data rate drones finite element simulation inductive coupling misalignment multiphysics simulation UAV wireless power transfer Control and Systems Engineering Signal Processing Hardware and Architecture Computer Networks and Communications Electrical and Electronic Engineering |
| Ano: | 2022 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | Universidade Nova de Lisboa |
| Idioma: | inglês |
| Origem: | Repositório Institucional da UNL |
| Resumo: | WPT system performances highly depend on the misalignment scenarios of the transmitter or the receiver coil. In this contribution, the authors analyze the effect of the misalignment influencing factors of the integrated WPT-PLC system receiving coil on the system performances. The simulations and experimental analysis are based on power efficiency and channel capacity metrics. The simulations are performed using finite element calculations in COMSOL Multiphysics and Advanced Design System (ADS) from Keysight technology. By analyzing the results, maximum transferred power is reached under resonance conditions. For instance, the calculated efficiencies versus the misalignment cases of the WPT-PLC system varies (η = 86% to 60%) when d = [3 cm to 7 cm], s = [3 cm to 9 cm], and for a tilt angle θ ≤ 20 deg, while the optimal data rate C(bps) is achieved while appealing different data access points and under reasonable SNR value. |
|---|