Publicação
Time-resolved evolution of the deformation mechanisms in a TRIP/TWIP Fe50Mn30Co10Cr10 high entropy during tensile loading probed with synchrotron X-ray diffraction
| Resumo: | The present research focuses on analyzing the deformation mechanisms associated with tensile loading of the Fe50Mn30Co10Cr10 high entropy alloy (HEA) using synchrotron x-ray diffraction (SXRD). This novel material is comprised by two major phases: γ-FCC and ε-HCP, where transformation induced plasticity (TRIP) effectively transforms the first into the latter, upon the application of an external stress. However, the presence of thermally stable ε-HCP prior to loading will also influence the deformation mechanism of the material during mechanical solicitation. As such, here we investigate the activation of different strain accommodation mechanisms and the consequent microstructural evolution. Four stages were identified in the mechanical response of this novel HEA, where the TRIP and the twinning induced plasticity (TWIP) deformation modes are the main events granting this HEA its outstanding properties. Such sequence of events allows to evidence the effectiveness of the collaboration between the transformative capability of the γ-FCC phase and the work hardening potential of the ε-HCP phase. This analysis is performed via quantitative and qualitative analysis of the SXRD data, allowing also to investigate the response behavior of specific crystallographic planes to the increasing stress throughout the experiment. |
|---|---|
| Autores principais: | Lopes, J. G. |
| Outros Autores: | Shen, J.; Maawad, E.; Agrawal, P.; Schell, N.; Mishra, R. S.; Oliveira, J. P. |
| Assunto: | FeMnCoCr High entropy alloys In-situ testing strengthening mechanisms Synchrotron X-ray diffraction TRIP TWIP General Materials Science Mechanics of Materials Mechanical Engineering |
| Ano: | 2024 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | Universidade Nova de Lisboa |
| Idioma: | inglês |
| Origem: | Repositório Institucional da UNL |
Registos relacionados
article Deformation behavior and strengthening effects of an eutectic AlCoCrFeNi2.1 high entropy alloy probed by in-situ synchrotron X-ray diffraction and post-mortem EBSD
por: Shen, Jiajia
Publicado em: (2023)
por: Shen, Jiajia
Publicado em: (2023)
article Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 410 stainless steel filler metal
por: Shen, Jiajia
Publicado em: (2022)
por: Shen, Jiajia
Publicado em: (2022)
article Synchrotron-based transmitted, Compton and fluorescence photons from phantom materials
por: Schiavon, Nicola
Publicado em: (2026)
por: Schiavon, Nicola
Publicado em: (2026)
article Scale dependence of the strain rate sensitivity of Twinning-Induced Plasticity steel
por: Bintu, A.
Publicado em: (2016)
por: Bintu, A.
Publicado em: (2016)
article Electrophysical and thermomechanical properties of perovskites La(0.5)A(0.5)Mn(0.5)Ti(0.5)O(3-delta) (A = Ca, Sr, Ba) used as fuel cell anodes: the effect of radius of alkali-earth cation
por: Kolotygin, V. A.
Publicado em: (2016)
por: Kolotygin, V. A.
Publicado em: (2016)
article Synchrotron-based crystal structure, associated morphology of snail and bivalve shells by X-ray diffraction
por: schiavon, nicola
Publicado em: (2017)
por: schiavon, nicola
Publicado em: (2017)
article Synchrotron-based diffraction-enhanced imaging and diffraction-enhanced imaging combined with CT X-ray imaging systems to image seeds at 30 keV
por: Schiavon, Nicola
Publicado em: (2026)
por: Schiavon, Nicola
Publicado em: (2026)
article In situ interlayer hot forging arc plasma directed energy deposition of Inconel® 625
por: Farias, Francisco Werley Cipriano
Publicado em: (2023)
por: Farias, Francisco Werley Cipriano
Publicado em: (2023)
article Laser welding of H-phase strengthened Ni-rich NiTi-20Zr high temperature shape memory alloy
por: Oliveira, João Pedro
Publicado em: (2021)
por: Oliveira, João Pedro
Publicado em: (2021)
article Residual Stresses in a Wire and Arc-Directed Energy-Deposited Al–6Cu–Mn (ER2319) Alloy Determined by Energy-Dispersive High-Energy X-ray Diffraction
por: Klein, T.
Publicado em: (2024)
por: Klein, T.
Publicado em: (2024)
groups Transmissibility versus damage detection
por: Maia, Nuno M. M.
Publicado em: (2018)
por: Maia, Nuno M. M.
Publicado em: (2018)
category Structure gradients by microfocus synchrotron X-ray diffraction in shell-core polyamide microcapsules
por: Denchev, Z.
Publicado em: (2015)
por: Denchev, Z.
Publicado em: (2015)
article Strain hardening rate sensitivity and strain rate sensitivity in TWIP steels
por: Bintu, Alexandra
Publicado em: (2015)
por: Bintu, Alexandra
Publicado em: (2015)
article Design of magnetic kappa-carrageenan-collagen bioinks for 3D bioprinting
por: Almeida, Duarte
Publicado em: (2024)
por: Almeida, Duarte
Publicado em: (2024)
article Effects of Heat Input on Weld Microstructure and Properties in Keyhole TIG Welding of Invar 36 Alloy
por: Liu, Hongbing
Publicado em: (2023)
por: Liu, Hongbing
Publicado em: (2023)
article Mechanical properties of natural cellular materials
por: Tchepel, D.
Publicado em: (2016)
por: Tchepel, D.
Publicado em: (2016)
article Microstructure, Thermal, and Mechanical Behavior of NiTi Shape Memory Alloy Obtained by Micro Wire and Arc Direct Energy Deposition
por: Silva, Tadeu C. da
Publicado em: (2025)
por: Silva, Tadeu C. da
Publicado em: (2025)
article Texture evolution in building direction of wire arc additive manufactured 316L stainless steel with high plasticity
por: Dong, Hang
Publicado em: (2025)
por: Dong, Hang
Publicado em: (2025)
groups Rheology of grouts for masonry injection
por: Baltazar, Luis G.
Publicado em: (2015)
por: Baltazar, Luis G.
Publicado em: (2015)
groups Novel approach to plasma facing materials in nuclear fusion reactors
por: Livramento, Vanessa
Publicado em: (2008)
por: Livramento, Vanessa
Publicado em: (2008)
article Preparation and Properties of Novel In-situ Composite Materials Based on Polyethylene-Polyamide Oriented Blends
por: Dencheva, Nadya Vasileva
Publicado em: (2008)
por: Dencheva, Nadya Vasileva
Publicado em: (2008)
article Recovery mechanisms in a compressed ni-ti superelastic alloy
por: Daer, Shimeni Baptista
Publicado em: (2018)
por: Daer, Shimeni Baptista
Publicado em: (2018)
article Grouts with improved durability for masonry consolidation
por: Baltazar, Luis G.
Publicado em: (2017)
por: Baltazar, Luis G.
Publicado em: (2017)
article Resistance spot welded NiTi shape memory alloy to Ti6Al4V
por: Zang, Yihu
Publicado em: (2025)
por: Zang, Yihu
Publicado em: (2025)
article Mechanical, thermal and morphological characteristics of poly(methyl methacrylate) (PMMA) nanocomposites reinforced with Cu-Cr layered double hydroxide
por: Kumar, Manish
Publicado em: (2020)
por: Kumar, Manish
Publicado em: (2020)
article Bioremediation of Cr(VI) polluted wastewaters by sorption on heat inactivated Saccharomyces cerevisiae biomass
por: Hlihor, R. M.
Publicado em: (2013)
por: Hlihor, R. M.
Publicado em: (2013)
groups ADVANCED TECHNOLOGIES FOR NATURAL STONE|INOVSTONE 4.0-IMPORTANT RESULTS FROM A RESEARCH PROJECT ON NATURAL STONE CONSTRUCTION MATERIALS SELECTION AND PERFORMANCE ANALYSIS
por: Pires, Vera
Publicado em: (2023)
por: Pires, Vera
Publicado em: (2023)
article Synchrotron-based XRD from rat bone of different age groups
por: Schiavon, Nicola
Publicado em: (2018)
por: Schiavon, Nicola
Publicado em: (2018)
article Amplified Sensitivity in SERS Detection of L1CAM With Silver Plasmonic Mesoporous Silica Capsules on an Imprinted Films
por: Castaño-Guerrero, Yuselis
Publicado em: (2024)
por: Castaño-Guerrero, Yuselis
Publicado em: (2024)
article Inconel 718 fabricated via arc-based directed energy deposition assisted with in situ interlayer hot forging
por: Farias, Francisco Werley Cipriano
Publicado em: (2025)
por: Farias, Francisco Werley Cipriano
Publicado em: (2025)
groups Characterisation of Ti/Al multilayered structures with slow positron beams applying a simplified positron depth distribution model
por: Naia, M. Duarte
Publicado em: (2010)
por: Naia, M. Duarte
Publicado em: (2010)
article CrFeVWX (X = Ta or Ti) High-Entropy Alloy: A Theoretical and Experimental Comparative Investigation on Phase Stability
por: Martins, Ricardo
Publicado em: (2026)
por: Martins, Ricardo
Publicado em: (2026)
school Sandwich for aeronautical applications
por: Sousa, Nuno Neves de
Publicado em: (2018)
por: Sousa, Nuno Neves de
Publicado em: (2018)
article Blind benchmarking of seven longitudinal tensile failure models for two virtual unidirectional composites
por: Breite, C.
Publicado em: (2021)
por: Breite, C.
Publicado em: (2021)
article New cork-based materials and applications
por: Gil, Luís
Publicado em: (2015)
por: Gil, Luís
Publicado em: (2015)
article Mortars with phase change materials - Part I: Physical and mechanical characterization
por: Cunha, Sandra Raquel Leite
Publicado em: (2015)
por: Cunha, Sandra Raquel Leite
Publicado em: (2015)
book Masonry components
por: Vasconcelos, Graça
Publicado em: (2014)
por: Vasconcelos, Graça
Publicado em: (2014)
article Elastic biodegradable starch/ethylene-co-vinyl alcohol fibre-mesh scaffolds for tissue engineering applications
por: Susano, Maria A.
Publicado em: (2014)
por: Susano, Maria A.
Publicado em: (2014)
article Recovery of mineral dust in composite materials
por: Bessa, João
Publicado em: (2018)
por: Bessa, João
Publicado em: (2018)
article Physical and mechanical properties of mortars with incorporation of phase change materials
por: Cunha, Sandra Raquel Leite
Publicado em: (2014)
por: Cunha, Sandra Raquel Leite
Publicado em: (2014)
Registos relacionados
-
article Deformation behavior and strengthening effects of an eutectic AlCoCrFeNi2.1 high entropy alloy probed by in-situ synchrotron X-ray diffraction and post-mortem EBSD
por: Shen, Jiajia
Publicado em: (2023) -
article Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 410 stainless steel filler metal
por: Shen, Jiajia
Publicado em: (2022) -
article Synchrotron-based transmitted, Compton and fluorescence photons from phantom materials
por: Schiavon, Nicola
Publicado em: (2026) -
article Scale dependence of the strain rate sensitivity of Twinning-Induced Plasticity steel
por: Bintu, A.
Publicado em: (2016) -
article Electrophysical and thermomechanical properties of perovskites La(0.5)A(0.5)Mn(0.5)Ti(0.5)O(3-delta) (A = Ca, Sr, Ba) used as fuel cell anodes: the effect of radius of alkali-earth cation
por: Kolotygin, V. A.
Publicado em: (2016)