Publicação
A Miniaturized Device Coupled with Digital Image Correlation for Mechanical Testing
| Resumo: | Miniaturized mechanical testing based on small sample testing technology is a powerful technique to characterize the mechanical properties of different materials, and it is being used in different application fields. However, the small size of the specimens poses several challenges because the results are highly sensitive to measurement accuracy and the corresponding mechanical properties can change substantially due to the so-called specimen size effect. In this work, a novel testing device based on miniaturized specimens is presented. The equipment is designed to test materials in tensile and compressive loadings, but it is also capable of performing reverse-loading tests. Buckling of the specimen is an inherent phenomenon in compression loadings, especially for thin materials. Therefore, specimen geometry is properly studied and optimized to mitigate this effect. To evaluate the deformation of the specimen, the digital image correlation (DIC) technique is used to capture the full-field strain in the central gauge section of the sample. A sensitivity analysis of the DIC setting parameters was performed for this application. To evaluate the performance of the developed system, experimental results of monotonic tests and tests with reverse loadings (tension-compression) are presented, considering two high-strength steels (DP500 and DP780). |
|---|---|
| Autores principais: | Cruz, Daniel J. |
| Outros Autores: | Xavier, José; Amaral, Rui L.; Santos, Abel D. |
| Assunto: | Bauschinger effect digital image correlation (DIC) miniaturized specimen sheet metal characterization Small Specimen Test Techniques (SSTT) Control and Systems Engineering Mechanical Engineering Electrical and Electronic Engineering |
| Ano: | 2022 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | Universidade Nova de Lisboa |
| Idioma: | inglês |
| Origem: | Repositório Institucional da UNL |
Registos relacionados
school Exploratory design of a heterogeneous mechanical test using topology optimisation
por: Almeida, Filipe José Matos de
Publicado em: (2019)
por: Almeida, Filipe José Matos de
Publicado em: (2019)
article On the design of innovative heterogeneous sheet metal tests using a shape optimization approach
por: Andrade-Campos, António
Publicado em: (2019)
por: Andrade-Campos, António
Publicado em: (2019)
article Deep ocean species. The little that is known mostly comes from collected specimens. Comment on L.A. Rocha et al. Letter "Specimen collection: An essential tool" (23 May, 344: 814).
por: Barreiros, João P.
Publicado em: (2014)
por: Barreiros, João P.
Publicado em: (2014)
article 2D and 3D Digital Image Correlation in Civil Engineering – Measurements in a Masonry Wall
por: Ramos, Tiago
Publicado em: (2015)
por: Ramos, Tiago
Publicado em: (2015)
table_chart A survey of exotic arthropods in disturbed Azorean forest habitats using SLAM traps
por: Borges, Paulo A. V.
Publicado em: (2022)
por: Borges, Paulo A. V.
Publicado em: (2022)
article Why classics endure
por: S. Pantaleon, Francisco
Publicado em: (2025)
por: S. Pantaleon, Francisco
Publicado em: (2025)
article A review of current bioanalytical approaches in sample pretreatment techniques for the determination of antidepressants in biological specimens
por: Soares, Sofia
Publicado em: (2021)
por: Soares, Sofia
Publicado em: (2021)
article Fracture toughness testing using photogrammetry and digital image correlation
por: Hao Kan, Wen
Publicado em: (2018)
por: Hao Kan, Wen
Publicado em: (2018)
school Miniaturized approaches for sample preparation in hair testing for drugs of abuse and their application in clinical and forensic scenarios
por: Rosado, Tiago Alexandre Pires
Publicado em: (2022)
por: Rosado, Tiago Alexandre Pires
Publicado em: (2022)
article Determination of Paris law constants with a reverse engineering technique
por: Branco, R.
Publicado em: (2008)
por: Branco, R.
Publicado em: (2008)
school Determinação de propriedades mecânicas através de ensaios de provetes miniatura, "Small Punch"
por: Ribeiro, Nuno Miguel de Almeida
Publicado em: (2013)
por: Ribeiro, Nuno Miguel de Almeida
Publicado em: (2013)
article Effect of microwave treatment on drying and water impregnability of Pinus pinaster and Eucalyptus globulus
por: Mascarenhas, Fernando Junior Resende
Publicado em: (2022)
por: Mascarenhas, Fernando Junior Resende
Publicado em: (2022)
school Minitablets and their in vitro characterization: towards miniaturized disintegration and dissolution
por: Ferreira, Nídia Quitério
Publicado em: (2016)
por: Ferreira, Nídia Quitério
Publicado em: (2016)
groups Predicting the mechanical behaviour of solid pine timber elements thyough non and semi-destructive methods
por: Saporiti Machado, J.
Publicado em: (2010)
por: Saporiti Machado, J.
Publicado em: (2010)
science Optimizing the management of thyroid specimens to efficiently generate whole slide images for diagnosis
por: Eloy, Catarina
Publicado em: (2024)
por: Eloy, Catarina
Publicado em: (2024)
article Bulge test technique and digital image correlation for the determination of the biaxial behavior of polymeric films
por: Kharrat, Fatma
Publicado em: (2023)
por: Kharrat, Fatma
Publicado em: (2023)
article Variance-Based Sensitivity Analysis of the Biaxial Test on a Cruciform Specimen
por: Pereira, André F.G.
Publicado em: (2022)
por: Pereira, André F.G.
Publicado em: (2022)
article Solid Phase-Based Microextraction Techniques in Therapeutic Drug Monitoring
por: Soares, Sofia
Publicado em: (2023)
por: Soares, Sofia
Publicado em: (2023)
article Experimental calibration of the bond-slip relationship of different CFRP-to-timber joints through digital image correlation measurements
por: Biscaia, Hugo C.
Publicado em: (2021)
por: Biscaia, Hugo C.
Publicado em: (2021)
assignment Uniaxial testing of expanded metal sheet
por: Oliveira, Juliana T.
Publicado em: (2002)
por: Oliveira, Juliana T.
Publicado em: (2002)
article A validated procedure for detection and quantitation of salvinorin a in pericardial fluid, vitreous humor, whole blood and plasma using solid phase extraction and gas chromatography–mass spectrometry
por: Margalho, Cláudia
Publicado em: (2013)
por: Margalho, Cláudia
Publicado em: (2013)
article Stress Intensity Factor Solutions for CTS Mixed Mode Specimen
por: Antunes, F. V.
Publicado em: (2019)
por: Antunes, F. V.
Publicado em: (2019)
image Strain fields adjacent to bone-implant interfaces: strain field analysis using digital image correlation techniques
por: Ribeiro, J.E.
Publicado em: (2008)
por: Ribeiro, J.E.
Publicado em: (2008)
groups Strain fields adjacent to bone-implant interfaces: strain field analysis using digital image correlation techniques
por: Ribeiro, J.E.
Publicado em: (2008)
por: Ribeiro, J.E.
Publicado em: (2008)
school Development of a framework for an automated mechanical testing
por: Nunes, Diego Saraiva
Publicado em: (2020)
por: Nunes, Diego Saraiva
Publicado em: (2020)
article Evaluation of heterogeneous mechanical tests for model calibration of sheet metals
por: Oliveira, Miguel G.
Publicado em: (2021)
por: Oliveira, Miguel G.
Publicado em: (2021)
article Stress intensity factors KI, KII, KIII, Keq, induced at the crack tip of CT specimens subjected to torsional loading
por: Martins, Rui F.
Publicado em: (2020)
por: Martins, Rui F.
Publicado em: (2020)
article Catalogue of Cenozoic echinoid type specimens in the Geological Museum (Lisbon, Portugal)
por: Pereira, Pedro
Publicado em: (2024)
por: Pereira, Pedro
Publicado em: (2024)
article Design optimization of cruciform specimens for biaxial fatigue loading
por: Baptista, Ricardo
Publicado em: (2014)
por: Baptista, Ricardo
Publicado em: (2014)
groups Optimal cruciform specimen design using the direct multi-search method and design variable influence study
por: Miguel Gomes Simões Baptista, Ricardo
Publicado em: (2017)
por: Miguel Gomes Simões Baptista, Ricardo
Publicado em: (2017)
article Fatigue crack propagation along interfaces of selective laser melting steel hybrid parts
por: Lima Santos, Luís
Publicado em: (2019)
por: Lima Santos, Luís
Publicado em: (2019)
article Envisaging a global infrastructure to exploit the potential of digitised collections
por: Groom, Quentin
Publicado em: (2023)
por: Groom, Quentin
Publicado em: (2023)
groups Design optimization of cruciform specimens for biaxial fatigue loading
por: Baptista, Ricardo
Publicado em: (2014)
por: Baptista, Ricardo
Publicado em: (2014)
article Optimization of cruciform specimens for biaxial fatigue loading with direct multi search
por: Baptista, R.
Publicado em: (2015)
por: Baptista, R.
Publicado em: (2015)
article Catalogue of Cenozoic echinoid type specimens in the Geological Museum (Lisbon, Portugal)
por: Pereira, Pedro
Publicado em: (2024)
por: Pereira, Pedro
Publicado em: (2024)
article Envisaging a global infrastructure to exploit the potential of digitised collections
por: Groom, Quentin
Publicado em: (2023)
por: Groom, Quentin
Publicado em: (2023)
article Finite element modelling and analysis of crack shape evolution in mode-I fatigue Middle Cracked Tension specimens
por: Branco, R.
Publicado em: (2008)
por: Branco, R.
Publicado em: (2008)
article Novel synthetic opioids – toxicological aspects and analysis
por: Tabarra, Inês
Publicado em: (2019)
por: Tabarra, Inês
Publicado em: (2019)
groups A new structural two-component epoxy adhesive: Strength and fracture characterization
por: Cardoso, M.G.
Publicado em: (2020)
por: Cardoso, M.G.
Publicado em: (2020)
article Optimal Cruciform Specimen Design Using the Direct Multi-search Method and Design Variable Influence Study
por: Baptista, R
Publicado em: (2018)
por: Baptista, R
Publicado em: (2018)
Registos relacionados
-
school Exploratory design of a heterogeneous mechanical test using topology optimisation
por: Almeida, Filipe José Matos de
Publicado em: (2019) -
article On the design of innovative heterogeneous sheet metal tests using a shape optimization approach
por: Andrade-Campos, António
Publicado em: (2019) -
article Deep ocean species. The little that is known mostly comes from collected specimens. Comment on L.A. Rocha et al. Letter "Specimen collection: An essential tool" (23 May, 344: 814).
por: Barreiros, João P.
Publicado em: (2014) -
article 2D and 3D Digital Image Correlation in Civil Engineering – Measurements in a Masonry Wall
por: Ramos, Tiago
Publicado em: (2015) -
table_chart A survey of exotic arthropods in disturbed Azorean forest habitats using SLAM traps
por: Borges, Paulo A. V.
Publicado em: (2022)