Publicação

Fish canning wastewater treatment by activated sludge: Application of factorial design optimization. Biological treatment by activated sludge of fish canning wastewater.

Ver documento

Detalhes bibliográficos
Resumo:The optimization of hydraulic retention time (HRT) and initial organic matter concentration for dissolved organic carbon (DOC) abatement of wastewater from a fish canning industry of northern Portugal by activated sludge was investigated using response surface methodology (RSM). The two parameters were chosen since it was found that the treatment efficiency is mainly influenced by them. The experimental data on DOC r emoval were fitted into a quadratic polynomial model using factorial design and RSM. The optimum process conditions were determined by analyzing the response surface of a three-dimensional plot and by solving the regression model equation. The obtained results showed a HRT of 6.4. h and an initial DOC of 406.2. mg/L as the best treatment conditions. Under these conditions, the maximum predicted DOC removal was 88.0%, confirming the feasibility and the reliability of fish canning wastewater treatment by activated sludge for organic content removal.
Autores principais:Cristovão, Raquel
Outros Autores:Gonçalves, Cristiana; Botelho, Cidália; Martins, Ramiro; Loureiro, José M.; Boaventura, Rui
Assunto:Activated sludge Factorial design Fish canning wastewater Optimization Wastewater treatment
Ano:2015
País:Portugal
Tipo de documento:artigo
Tipo de acesso:acesso aberto
Instituição associada:Instituto Politécnico de Bragança
Idioma:inglês
Origem:Biblioteca Digital do IPB
Descrição
Resumo:The optimization of hydraulic retention time (HRT) and initial organic matter concentration for dissolved organic carbon (DOC) abatement of wastewater from a fish canning industry of northern Portugal by activated sludge was investigated using response surface methodology (RSM). The two parameters were chosen since it was found that the treatment efficiency is mainly influenced by them. The experimental data on DOC r emoval were fitted into a quadratic polynomial model using factorial design and RSM. The optimum process conditions were determined by analyzing the response surface of a three-dimensional plot and by solving the regression model equation. The obtained results showed a HRT of 6.4. h and an initial DOC of 406.2. mg/L as the best treatment conditions. Under these conditions, the maximum predicted DOC removal was 88.0%, confirming the feasibility and the reliability of fish canning wastewater treatment by activated sludge for organic content removal.