Detalhes bibliográficos
| Resumo: | This paper describes a robot with 12 degrees of freedom for pick-and-place operations using bricks. In addition, an optimization approach is proposed, which determines the state of each joint (that establishes the pose for the robot) based on the target position while minimizing the effort of the servomotors avoiding the inverse kinematics problem, which is a hard task for a 12 DOF robot manipulator. Therefore, it is a multi-objective optimization problem that will be solved using two optimization methods: the Stretched Simulated Annealing method and the NSGA II method. The experiments conducted in a simulation environment prove that the proposed approach is able to determine a solution for the inverse kinematics problem. A real robot formed by several servomotors and a gripper is also presented in this research for validating the solutions. |
|---|
| Autores principais: | Costa, Paulo Gomes da |
|---|
| Outros Autores: | Lima, José; Pereira, Ana I.; Costa, Pedro; Pinto, Andry |
|---|
| Assunto: | Robot manipulators Multi-objective optimization Pick-and-place |
|---|
| Ano: | 2016 |
|---|
| País: | Portugal |
|---|
| Tipo de documento: | comunicação em conferência |
|---|
| Tipo de acesso: | acesso aberto |
|---|
| Instituição associada: | Instituto Politécnico de Bragança |
|---|
| Idioma: | inglês |
|---|
| Origem: | Biblioteca Digital do IPB |
|---|