Publicação

One dimensional consolidation and direct shear tests: setup based on a labview approach

Ver documento

Detalhes bibliográficos
Resumo:This work describes an experimental setup that was developed in order to automate the one-dimensional consolidation and the direct shear Tests. This experimental setup assures repeatability in the data acquisition, avoiding human errors, mainly when the tests data vary with a high dynamic. The described setup is based on LabVIEW, LVDT sensors and a 16 Bit Data Acquisition Board. For the one-dimensional consolidation test it was used a Load device and a consolidometer, being the experimental setup developed according to the standard ASTM D2435 / D2435M - 11. For the direct shear Test it was used an apparatus, covered in ASTM standard D-3080 / D3080M - 11, ”Standard Method for direct shear test on soils under consolidated drained conditions”.
Autores principais:Gonçalves, José
Outros Autores:Batista, José; Paula, António Miguel; Braz-César, Manuel
Assunto:Direct shear test LabVIEW One dimensional consolidation test
Ano:2019
País:Portugal
Tipo de documento:comunicação em conferência
Tipo de acesso:acesso restrito
Instituição associada:Instituto Politécnico de Bragança
Idioma:inglês
Origem:Biblioteca Digital do IPB
Descrição
Resumo:This work describes an experimental setup that was developed in order to automate the one-dimensional consolidation and the direct shear Tests. This experimental setup assures repeatability in the data acquisition, avoiding human errors, mainly when the tests data vary with a high dynamic. The described setup is based on LabVIEW, LVDT sensors and a 16 Bit Data Acquisition Board. For the one-dimensional consolidation test it was used a Load device and a consolidometer, being the experimental setup developed according to the standard ASTM D2435 / D2435M - 11. For the direct shear Test it was used an apparatus, covered in ASTM standard D-3080 / D3080M - 11, ”Standard Method for direct shear test on soils under consolidated drained conditions”.