Publicação
Role of ultraviolet absorbers (UVA) and hindered amine light stabilizers (HALS) in ABS stabilization
| Resumo: | The present work evaluates the combination effect of hindered amine light stabilizers (HALS) and ultraviolet absorbers (UVA) on the ultraviolet (UV) stability of acrylonitrilebutadiene- styrene (ABS). Thus, two types of light stabilizers, Tinuvin P and Chimassorb 119 FL, were used to improve the ABS endurance against UV. Stabilized ABS samples were submitted to accelerated weathering in a Xenontest 150 S chamber, according to standard methods, in order to predict copolymer lifetime within a commercially acceptable time period. Infrared spectroscopy with attenuated total reflectance accessory (FTIR-ATR) was used to follow chemical modifications that occur on the material surface as a consequence of degradation process. While non-stabilized ABS samples loose the butadiene component in the first 22 h of exposure, in stabilized samples submitted to same accelerated conditions this component only disappears after 150 h of exposure. Non-stabilized and stabilized ABS samples present a similar yellowing behavior, a gradually increase with exposure time. Nevertheless, as expected, color modifications are less pronounced for stabilized ABS samples. The results obtained suggest that a better performance was achieved for stabilized ABS samples with Tinuvin P and Chimassorb 119 FL, which is very important to extend the copolymer lifetime. |
|---|---|
| Autores principais: | Santos, R. M. |
| Outros Autores: | Botelho, Gabriela; Machado, A. V. |
| Assunto: | ABS Light stabilizers Yellowing Chemical modifications |
| Ano: | 2010 |
| País: | Portugal |
| Tipo de documento: | comunicação em conferência |
| Tipo de acesso: | acesso restrito |
| Instituição associada: | Universidade do Minho |
| Idioma: | inglês |
| Origem: | RepositóriUM - Universidade do Minho |
| Resumo: | The present work evaluates the combination effect of hindered amine light stabilizers (HALS) and ultraviolet absorbers (UVA) on the ultraviolet (UV) stability of acrylonitrilebutadiene- styrene (ABS). Thus, two types of light stabilizers, Tinuvin P and Chimassorb 119 FL, were used to improve the ABS endurance against UV. Stabilized ABS samples were submitted to accelerated weathering in a Xenontest 150 S chamber, according to standard methods, in order to predict copolymer lifetime within a commercially acceptable time period. Infrared spectroscopy with attenuated total reflectance accessory (FTIR-ATR) was used to follow chemical modifications that occur on the material surface as a consequence of degradation process. While non-stabilized ABS samples loose the butadiene component in the first 22 h of exposure, in stabilized samples submitted to same accelerated conditions this component only disappears after 150 h of exposure. Non-stabilized and stabilized ABS samples present a similar yellowing behavior, a gradually increase with exposure time. Nevertheless, as expected, color modifications are less pronounced for stabilized ABS samples. The results obtained suggest that a better performance was achieved for stabilized ABS samples with Tinuvin P and Chimassorb 119 FL, which is very important to extend the copolymer lifetime. |
|---|