Publicação
Laser texturing of piston ring for tribological performance improvement
| Resumo: | The radial surface coating layer of compression piston rings is used to improve their wear resistance during the internal combustion engine operation. However, at top dead centers, the friction coefficient of the piston ring-cylinder liner pair is detrimental to the engine's tribological performance. In this work, dimples with different texture dimensions and densities were tested in a home-developed tribometer. The friction coefficient was measured for all samples, and for those with the best results, their wear resistance was assessed. The texture with an aspect ratio of 0.25 and a density area of 15% reported the best tribological results. |
|---|---|
| Autores principais: | Ferreira, Ana Rita Machado |
| Outros Autores: | Carvalho, Óscar Samuel Novais; Sobral, Luis; Carvalho, Sandra; Silva, Filipe Samuel |
| Assunto: | Piston ring Surface texture Friction Wear |
| Ano: | 2023 |
| País: | Portugal |
| Tipo de documento: | artigo |
| Tipo de acesso: | acesso restrito |
| Instituição associada: | Universidade do Minho |
| Idioma: | inglês |
| Origem: | RepositóriUM - Universidade do Minho |
| Resumo: | The radial surface coating layer of compression piston rings is used to improve their wear resistance during the internal combustion engine operation. However, at top dead centers, the friction coefficient of the piston ring-cylinder liner pair is detrimental to the engine's tribological performance. In this work, dimples with different texture dimensions and densities were tested in a home-developed tribometer. The friction coefficient was measured for all samples, and for those with the best results, their wear resistance was assessed. The texture with an aspect ratio of 0.25 and a density area of 15% reported the best tribological results. |
|---|