Publicação
PVA/CA based electrospun nanofibers: influence of processing parameters in the fiber diameter
| Resumo: | Recently, the electrospinning technique has been explored as a natural and synthetic polymer processing tool due to its versatility and potential to generate complex structures at a nanoscale. In this work, non-woven nanofibrous mats were electrospun, with a structure resembling the extracellular matrix, for prospective biomedical uses. Poly (vinyl alcohol) (PVA) and cellulose acetate (CA) based electrospun nanofibrous meshes were prepared at different ratios 100/0, 90/10, 80/20 and 70/30 and characterized in terms of fiber diameter. The process was kept as green as possible by resorting to a combination of acetic acid and distilled water as solvents. Optimal conditions for PVA/CA processing were established at 29 kV, feeding rate of 0.8 mL/h and distance between needle and collector of 17 cm. These allowed for the most uniform fibers with the smallest diameters to be produced. |
|---|---|
| Autores principais: | Teixeira, Marta Albertina |
| Outros Autores: | Amorim, M. T. Pessoa de; Felgueiras, Helena Prado |
| Assunto: | Poly(vinyl alcohol) Cellulose acetate Electrospun nanofibers Fiber processing conditions |
| Ano: | 2019 |
| País: | Portugal |
| Tipo de documento: | comunicação em conferência |
| Tipo de acesso: | acesso aberto |
| Instituição associada: | Universidade do Minho |
| Idioma: | inglês |
| Origem: | RepositóriUM - Universidade do Minho |
| Resumo: | Recently, the electrospinning technique has been explored as a natural and synthetic polymer processing tool due to its versatility and potential to generate complex structures at a nanoscale. In this work, non-woven nanofibrous mats were electrospun, with a structure resembling the extracellular matrix, for prospective biomedical uses. Poly (vinyl alcohol) (PVA) and cellulose acetate (CA) based electrospun nanofibrous meshes were prepared at different ratios 100/0, 90/10, 80/20 and 70/30 and characterized in terms of fiber diameter. The process was kept as green as possible by resorting to a combination of acetic acid and distilled water as solvents. Optimal conditions for PVA/CA processing were established at 29 kV, feeding rate of 0.8 mL/h and distance between needle and collector of 17 cm. These allowed for the most uniform fibers with the smallest diameters to be produced. |
|---|