Detalhes bibliográficos
| Resumo: | Martensitic 9–12% chromium steels present the most preferred material group for high-temperature components in thermal power plants. Previous investigations revealed that due to the use of a creep-resistant martensitic steel strengthened with boron and nitrogen (MarBN), the minimum creep rate can significantly be decreased. Furthermore, the formation of the fine-grained heat-affected zone (FGHAZ) due to welding can be suppressed. This FGHAZ is subject to the most dominant failure mode (type IV cracking) of welded joints during creep exposure. By using electron beam welding, the total width of the heat-affected zone (HAZ) can be reduced compared to conventional arc welding processes. Preceding investigation on electron beam welding of MarBN steel showed recurring difficulties with hot cracking within the fusion zone. Various approaches were tried to produce defect-free welds without the use of any filler metal, but no satisfactory results were achieved. In this investigation, the chemical composition of the fusion zone was modified by the addition of conventional 9% chromium creep-resistant steel as a filler material. By using the filler material, the fusion zone was locally (de-)alloyed and defect-free joints of MarBN steel were produced. |
|---|
| Autores principais: | Rabl, Antonia |
|---|
| Outros Autores: | Pixner, Florian; Duarte, Bruno; Blatesic, Danijel; Béal, Coline; Enzinger, Norbert |
|---|
| Assunto: | 9–12% Cr steels EBW Focus wobbling Local (de-)alloying MarBN steel Welding of large cross sections Mechanics of Materials Mechanical Engineering Metals and Alloys |
|---|
| Ano: | 2019 |
|---|
| País: | Portugal |
|---|
| Tipo de documento: | artigo |
|---|
| Tipo de acesso: | acesso aberto |
|---|
| Instituição associada: | Universidade Nova de Lisboa |
|---|
| Idioma: | inglês |
|---|
| Origem: | Repositório Institucional da UNL |
|---|